HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911406468
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
27 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It is equipped with a MultiEthernet communication interface and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. The controller features internal air cooling through an integrated blower, a device peak current of 6 Amps, and an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW is manufactured by Bosch Rexroth Indramat and belongs to the HCS IndraDrive Controllers series. It serves as a compact axis controller that combines mains rectification, DC-link management, and drive logic for low-current servo motors. Designed for cabinet installation in automated machinery, the unit fits into the HCS01 line and provides motion control where space, integrated power electronics, and fieldbus flexibility are required. Its compact format allows one device to handle both power conversion and axis control where cabinet space is limited.
The controller accepts a three-phase supply of 3 × AC 110…230 V ±10 %, so it operates on common low-voltage mains without a transformer. An internal air cooling path driven by an integrated blower expels heat, eliminating the need for external fan kits. During dynamic load peaks it can deliver up to 6 A, giving sufficient overload headroom for motor acceleration and short-term demand changes. Touch-safe construction is limited to an IP20 enclosure, so mounting behind a closed electrical panel is required. Upstream communication relies on MultiEthernet, allowing direct selection of EtherNet/IP, PROFINET, or EtherCAT through configuration rather than add-on cards.
The electronics conform to design version 1 and pair with the control section coded BASIC, which provides standard drive functionality without integrated safety extensions. Motor feedback connects to Interface 1, which supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2 protocols for absolute position capture and electronic nameplate reading. DC-bus energy management follows an infeed and regeneration principle, allowing recovered energy to be shared with other compatible drives on the same supply rail. This arrangement supports coordinated multi-axis operation and helps the drive use returned energy from decelerating motors within the shared system.
Frequently Asked Questions about HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW:
Q: What type of communication interface does the HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW IndraDrive controller use?
A: The HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW features a MultiEthernet communication interface for flexible network connectivity.
Q: What is the device peak current for the HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW drive controller?
A: This controller supports a device peak current of 6 A, accommodating moderate power requirements.
Q: How is the HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW cooled?
A: Cooling is achieved via an internal air method that uses an integrated blower for heat dissipation.
Q: What mains voltage does the HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW require?
A: The controller operates with a mains voltage input of 3 x AC 110...230 V ±10%.
Q: What encoder interfaces are available on the HCS01.1E-W0006-A-02-B-ET-EC-EP-S5-NN-FW?
A: This model provides encoder interface support for IndraDyn Hiperface and EnDat 2.1/2.2.
