Product Description:

The HCS01.1E-W0006-A-02-B-ET-EC-EP-NN-NN-FW belongs to the HCS IndraDrive Controllers series produced by Bosch Rexroth Indramat. This drive controller governs torque, speed, and position loops for servo and induction motors in automated machinery. It serves as the power electronics stage between the incoming AC supply and the motor windings, converting electrical input into controlled motor output. That role supports axes that require stable speed regulation, repeatable positioning, and coordinated motion inside compact control cabinets.

Network connectivity is provided through the MultiEthernet interface, allowing the unit to join EtherNet/IP, PROFINET IO, or EtherCAT networks without additional hardware. Internal logic and parameter handling use the BASIC control section, which is the entry-level control option in this product line. Thermal management relies on internal air cooling driven by an integrated blower that moves air across the power stage. The controller can deliver a peak phase current of 6 A, which supports short-term acceleration with a suitable motor. It is intended for installation in an enclosure with IP20 protection, so the surrounding cabinet must limit dust entry and prevent accidental contact with live parts.

The power stage accepts a three-phase supply of 3 x AC 110 to 230 V ±10%, allowing use on low-voltage factory systems and common North American line voltages. Motor feedback is read through the built-in IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, which supports absolute position transmission over serial links. This feedback arrangement gives the drive access to rotor position data needed for closed-loop control during startup and normal operation. Energy exchange with the DC bus supports infeeding and feeding, so this single-axis unit can draw from or return power to a common supply module. The controller is supplied without a safety interface, so STO and other safe-motion functions must be provided externally.