Product Description:

The HCS01.1E-W0006-A-02-B-ET-EC-EM-L3-NN-FW drive controller is produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It conditions incoming line power, processes feedback, and issues precisely timed current so connected servo or induction motors follow PLC motion commands. By combining power electronics and control logic in a compact housing, it supports material-handling, packaging, and light-assembly machines that benefit from distributed drive architecture.

Field communication is handled through MultiEthernet, allowing the same hardware to join EtherNet/IP, PROFINET, or EtherCAT networks without option cards. The power section accepts a mains range of 3 x AC 110...230 V ±10%, which suits low-voltage three-phase supplies common in small automation cells. During acceleration or short overloads, it can source up to 6 A of device peak current, giving adequate torque headroom while keeping the continuous rating modest. Thermal energy is removed by internal air cooling, and an integrated blower forces cabinet air across the heat sink without external ducts. With an enclosure classification of IP20, the unit must be installed inside a cabinet that provides the required protection against contact and contaminants.

The control section is the BASIC type, supplying standard motion functions without the advanced technology options used in higher tiers. Feedback connectivity includes a primary port for Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals and a secondary channel that outputs encoder emulation pulses for legacy control loops or diagnostic monitoring. Machine safety is addressed by the integrated STO interface, which removes drive torque through solid-state logic rather than mechanical contactors. The unit uses design version 1 and an infeeding or feeder power topology, which fits compact drive arrangements that need integrated control, feedback handling, and network communication in one housing.