HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911392993
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW is part of the HCS IndraDrive Controllers series and is designed as a drive controller with a peak current of 6 Amps. It supports MultiEthernet communication and features IP20 protection, with cooling provided by an internal blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW is a compact drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It converts mains energy into a controlled DC link and three-phase output that steers synchronous or induction motors used in conveyors, pick-and-place modules, and packaging axes. Mounted close to the machine, the unit works with a plug-on control section to process motion commands, fieldbus traffic, and protective monitoring locally, which shortens wiring runs and improves control cycle times in distributed automation architectures.
Electrical service is supplied through a three-phase network of 3 x AC 110–230 V ±10%, and the drive can deliver a peak device current of 6 A to the connected motor phases. Communication with higher-level PLCs is made over the MultiEthernet port, supporting several real-time Ethernet protocols without additional option cards. An IP20 housing limits finger ingress and allows installation inside a standard switchgear rack. Thermal energy from switching losses is removed by internal air cooling that relies on an integrated blower, so no external heat sink or ducting is necessary.
The control section that mates with this power module is the BASIC variant and corresponds to design version 1, giving a standardized parameter set for general-purpose positioning tasks. Two feedback channels accept IndraDyn Hiperface/EnDat 2.1/2.2 encoders, allowing dual-loop operation or support for different encoder types without rewiring. Power for internal electronics is provided through an infeeding and fed supply concept, so the unit can share a common DC bus with neighboring drives and return regenerated energy to the line. No additional design features are present, and the module matches the HCS01 line depth to keep cabinet layouts consistent.
Frequently Asked Questions about HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW:
Q: What type of communication interface does the HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW drive controller use?
A: The HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW is equipped with MultiEthernet as its communication interface, enabling support for several Ethernet-based protocols.
Q: How is the HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW drive controller cooled?
A: This model features air cooling via an integrated blower, ensuring internal temperature regulation during operation.
Q: What mains voltage range does the HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW support?
A: The HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW operates at a mains voltage of 3 x AC 110 to 230 V with a ±10% tolerance.
Q: What is the peak current rating for the HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW?
A: This drive controller provides a device peak current of 6 A, suitable for applications requiring this output capacity.
Q: Which encoder interfaces are available on the HCS01.1E-W0006-A-02-B-ET-EC-EC-S5-NN-AW?
A: Both Interface 1 and Interface 2 on this model support IndraDyn Hiperface and EnDat 2.1/2.2 encoders for feedback and communication.
