Product Description:

The HCS01.1E-W0006-A-02-B-ET-EC-EC-NN-AA-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. As an HCS drive controller, it regulates current and velocity loops for servo and induction motors used in automated handling, packaging, and processing lines. The unit belongs to the compact HCS01 line and serves as the power section between the mains supply, motor feedback, and higher-level PLCs so a single axis can follow commanded motion accurately. That arrangement supports compact cabinet layouts where power conversion and motion control must be combined in one module.

Electrical performance centers on a mains input of 3-phase AC 110–230 V ±10%, allowing the same hardware to be used in low-voltage or standard control cabinets. The device delivers a peak output of 6 A, which provides the short-term current available for motor acceleration. Heat is removed by internal air cooling through an integrated blower, and the enclosure has an IP20 rating, so the controller is intended for installation inside a protected cabinet. Network traffic passes through the built-in MultiEthernet interface, giving access to common real-time Ethernet fieldbuses without additional option cards. It is built as design version 1 on the HCS01 hardware platform.

Feedback handling is provided by two identical encoder ports that accept IndraDyn Hiperface/EnDat signals, enabling redundant or dual-loop configurations. This layout allows the controller to process motor and load-side position feedback within the same axis. The control section is classified as BASIC, and the power section is matched to that design for straightforward integration. The DC bus arrangement supports infeeding and fed operation, so the unit can either supply energy to or draw it from a common bus system. A dedicated safety interface is not included, so any safety-related stop must be implemented by external hardware or control logic.