HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911404610
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller features a MultiEthernet communication interface, a device peak current of 6 Amps, and an IP20 rating. It utilizes internal air cooling through an integrated blower and supports encoder interfaces like IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW drive controller is produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It converts incoming three-phase supply energy into regulated motor power while executing current, speed, and safety control loops. The unit serves as the power section in a modular IndraDrive stack and works with a detachable control section that manages motion commands. This arrangement separates the motion control functions from the power module and supports modular machine layouts. Its compact format and field-oriented control make it suitable for precise positioning or velocity regulation in light-duty conveyor modules, assembly robots, and automated laboratory equipment.
Communication is handled through MultiEthernet, so the controller can be integrated on PROFINET, EtherNet/IP, or EtherCAT networks without extra hardware. Cooling is provided by internal air cooling, which pulls cabinet air across the heat sink and removes the need for external ducting. The power stage delivers a peak current of 6 A, allowing short-term torque boosts for small servo axes. Supply wiring can be connected to 3 × AC 110…230 V ±10 % mains, giving the drive compatibility with a wide range of low-voltage systems. Motor position feedback is handled through an interface that supports IndraDyn Hiperface / EnDat 2.1 / 2.2, allowing the controller to work with compatible Rexroth and third-party motors.
As a cabinet-mounted device, it carries an enclosure rating of IP20, so it must be installed inside a closed electrical cabinet. The power section uses infeeding and fed operation, which means it can accept regenerated energy when DC bus capacitors are coupled between axes. The unit is Design version 1 and is matched to the BASIC control section for standard motion functions. A second motor feedback port is not equipped, so the feedback layout is limited to a single motor interface.
Frequently Asked Questions about HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW:
Q: What communication interface is supported by the HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW drive controller?
A: The HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW uses a MultiEthernet communication interface for flexible connectivity with automation networks.
Q: What is the maximum peak current for the HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW controller?
A: This drive controller supports a peak current of 6 A, allowing it to handle moderate power applications.
Q: How is the HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW drive controller cooled during operation?
A: Cooling is provided by internal air flow using an integrated blower within the unit.
Q: What is the IP rating for the HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW drive controller?
A: The HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW is rated IP20, meaning it is protected against solid foreign objects over 12mm but not against water.
Q: What is the specified mains voltage range for the HCS01.1E-W0006-A-02-A-ET-EC-NN-S4-NN-FW?
A: The mains voltage for this drive is 3 x AC 110...230 V with a tolerance of ±10%, suitable for various industrial supply conditions.
