HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911383138
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
15 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW is a drive controller in the HCS IndraDrive Controllers series. It features a MultiEthernet communication interface and has a device peak current of 5 Amps. The controller uses internal air cooling with an integrated blower and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It functions as the central inverter and control node that modulates line power into variable motor voltages and currents for synchronous or induction axes, while forwarding status data to supervisory PLCs in automated production cells. In industrial automation, its compact build suits packaging machinery, material-handling stations, and secondary process drives where moderate power is sufficient. This arrangement supports controlled motor operation in applications that need a compact drive platform rather than a larger standalone system.
Network communication is handled through a MultiEthernet port, allowing the unit to integrate with several industrial Ethernet protocols without extra modules. The power section accepts a three-phase supply of 3 x AC 200 to 500 V ±10%, and it can deliver up to 5 A of peak output current to a connected motor. Thermal management relies on internal air cooling with an integrated blower, so no external cabinet airflow is required. The enclosure is rated IP20, which provides finger-safe construction but no protection against dripping liquids. This layout is suitable for installation inside a control cabinet where basic touch protection is needed around energized components.
The control section uses the BASIC design and carries design version 1. Position feedback is accepted on Interface 1 through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder connector, while Interface 2 is not equipped, which helps keep the layout compact. The internal power supply supports Infeeding / Feeded operation, permitting energy exchange with adjacent units on a common DC bus. Firmware is not factory installed, so it must be ordered separately to match the required software functions. No additional design features are listed for this controller.
Frequently Asked Questions about HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW:
Q: What type of communication interface does the HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW use?
A: The HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW supports MultiEthernet communication for flexible networking options.
Q: What is the peak current output of the HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW drive controller?
A: This model provides a device peak current of 5 A during operation.
Q: How is the HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW cooled?
A: It uses an internal air cooling method through an integrated blower.
Q: What is the IP protection rating of the HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW?
A: The drive controller has an IP20 rating, offering basic protection against solid objects.
Q: What mains voltage range is supported by the HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW?
A: The HCS01.1E-W0005-A-03-B-ET-EC-NN-SB-NN-FW is designed for use with 3-phase AC mains voltage from 200 to 500 V ±10%.
