Product Description:

The HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-AW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It serves as the power and communication bridge between the plant's PLC and a connected servo or induction motor, adjusting voltage and current in real time so automated axes track their commanded torque, speed, or position profiles. This allows one controller to support both dynamic motion tasks and steady-speed operation within the same cabinet. By combining control, protection, and network functions in one enclosure, the unit simplifies cabinet layouts and supports coordinated multi-axis motion in packaging, material handling, and general machinery.

The controller accepts a three-phase supply of 3 × AC 200–500 V and sustains transient load demands up to 5 A of device peak current, allowing moderate-power actuators to accelerate without derating. System traffic moves through a MultiEthernet port that supports SERCOS III, EtherNet/IP, PROFINET, and EtherCAT, reducing the need for separate protocol-specific hardware. Cabinet installation is required because the housing is rated IP20, which provides finger protection but no environmental sealing. The mechanical size tag HCS01 is used for accessory matching, parameter selection, and dimensional reference when the drive is integrated with related system components.

The unit uses a separable control section with a BASIC design type that is matched to the power section, which keeps the configuration straightforward while keeping the electronics and power stage clearly organized. Position feedback enters through the dedicated Encoder IndraDyn Hiperface/EnDat 2.1/2.2 socket, and the second interface slot remains unused. Heat is removed by an integrated blower that provides internal air cooling, so no external ducting is required. DC-bus energy exchange follows an infeeding and feeding topology, allowing common-bus or regenerative operation. The design version is 1.