Product Description:

The HCS01.1E-W0005-A-03-B-ET-EC-EP-SB-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It belongs to the HCS01 line and modulates power between a three-phase mains supply and servo or induction motors in automated machinery. By processing encoder feedback and fieldbus data, the controller executes torque, speed, or position loops. The unit manages motor current so connected axes can follow commanded motion profiles under changing load conditions. This makes it suitable for conveyors, packaging stations, and handling systems that require coordinated motion and stable axis control.

For electrical integration, the device accepts 3 × AC 200 to 500 V ±10%, covering a wide range of industrial supply conditions. An internal blower provides internal air cooling, so cabinet air passes through the heat sink without external ducting. During acceleration peaks, the power stage supplies up to 5 A to the motor phases, which helps determine suitable upstream protection and motor lead sizing. Network traffic moves through a Multi-Ethernet interface that supports several real-time protocols on the same platform. The IP20 enclosure protects against finger contact with live parts, so the controller is intended for installation inside a closed cabinet. Because cooling air is drawn through the controller, the cabinet layout should preserve clear airflow paths around the heat sink and adjacent modules.

The control electronics use the BASIC design section, which fits applications that do not require expanded functional options. Position feedback wiring terminates on an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, allowing direct connection to compatible motor feedback systems. Direct feedback compatibility supports accurate commutation and stable position response during dynamic operation. The controller is Version 1, which identifies the revision level of this unit. DC power is obtained from the common bus through an infeeding and fed supply method, allowing energy sharing with adjacent axes. The listed configuration does not indicate extra mechanical accessories, and the control section arrangement is intended for standard cabinet-based drive assemblies.