Product Description:

The HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-AA-FW belongs to the HCS IndraDrive Controllers series from Bosch Rexroth Indramat. It is a compact servo drive controller that manages power transfer and feedback exchange between IndraDyn motors and higher-level PLCs in factory automation. By coordinating torque, speed, and position loops, the unit supports deterministic motion profiles for conveyors, pick-and-place axes, and packaging lines. Its compact format makes it suitable for cabinets where several motion components must be installed in limited space.

At the control layer, data exchange occurs over the MultiEthernet interface, allowing synchronous communication with EtherNet/IP, PROFINET, and other real-time networks. Motion algorithms run on a control section designated as BASIC, which provides the parameter set for standard point-to-point positioning without integrated advanced safety functions. Thermal management relies on internal air cooling, and an integrated blower circulates cabinet air through the heat sink so no external ducting is required. The power stage can deliver a peak current of 5 A, which supports short-term acceleration for light servomotor axes. An IP20 housing protects the electronics from contact with solid objects larger than 12 mm and is intended for installation inside a closed electrical cabinet.

Supply compatibility spans 3 × AC 200–500 V with a tolerance of ±10%, so one controller can operate on a wide range of industrial mains systems. The DC bus uses a power supply unit for infeeding and fed operation, allowing regenerative and non-regenerative configurations in multi-axis systems. Within the HCS01 line, the hardware is design version 1. When paired with matching encoder cards for IndraDyn feedback, the controller is suitable for indexing tables, small gantries, and auxiliary axes that do not require a dedicated safety interface.