HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345393
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW is part of the HCS IndraDrive Controllers series and features a MultiEthernet communication interface as well as an IP20 rating. This drive controller has a peak current of 5 Amps, supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2, and uses air cooling through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW drive controller is produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As part of an IndraDrive axis, this unit rectifies incoming three-phase mains power, generates a PWM output for synchronous or induction motors, and hosts the motion logic provided by its plug-on control section. It is intended for cabinet installation in packaging, material-handling, and general automation equipment where compact dimensions and integrated networking are required. This arrangement lets one compact unit handle power conversion and axis control inside machines that need coordinated motor operation.
It accepts a supply of 3 x AC 200–500 V ±10%, allowing installation on low- or mid-voltage factory buses without tap changers. During acceleration or braking, the inverter can deliver up to 5 A of device peak current, which supports short-term motor loading during dynamic moves. Heat generated by the power semiconductors is removed by internal air cooling, so no external heat sink or liquid circuit is necessary. The electronics are housed in an IP20 enclosure, which provides finger-safe protection inside a switch cabinet but no sealing against dust or water jets. For networked motion, the power stage is fitted with MultiEthernet communication, allowing parameter exchange across EtherNet/IP, PROFINET, EtherCAT, or SERCOS III segments through a single communication platform. This helps the controller fit into different automation networks without changing the basic hardware layout.
The control section carried by this inverter is designated BASIC, providing standard position, velocity, and torque loops without an integrated safety channel, so external STO hardware must be considered where required. Hardware stamping lists design version 1, which matches the stated mechanical layout and connector arrangement for this unit. Motor feedback arrives through the multifunction connector that supports IndraDyn Hiperface/EnDat 2.1/2.2 encoder feedback, so both single-turn and multi-turn transducers can be used. The power unit is classified for infeeding and fed operation, permitting connection to a common DC bus that can either supply energy or receive regenerated power. This setup is useful in multi-axis systems where one axis may return energy while another axis is accelerating.
Frequently Asked Questions about HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW controller?
A: This model supports MultiEthernet communication for flexible connectivity with various industrial networks.
Q: What is the peak current rating for the HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW drive controller?
A: The HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW provides a device peak current of 5 A.
Q: How is the HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW cooled during operation?
A: Cooling is achieved via internal air using an integrated blower to maintain optimal operating temperatures.
Q: What encoder interface types are supported by the HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW?
A: This controller features an encoder interface compatible with IndraDyn Hiperface and EnDat 2.1/2.2.
Q: Does the HCS01.1E-W0005-A-03-B-ET-EC-DA-NN-NN-FW include a safety interface?
A: The safety interface is not equipped on this drive controller model.
