HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345405
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
38 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features a MultiEthernet communication interface, CANopen, and encoder support with IndraDyn Hiperface and EnDat 2.1/2.2. The unit has a device peak current of 5 Amps, operates on 3-phase AC 200 to 500 Volts, and is cooled by an internal blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat and assigned to the HCS IndraDrive Controllers series. It belongs to the HCS01 line, uses design version 1, and works with the BASIC control section identified in its type code. In factory automation, the unit regulates servo axes by converting incoming three-phase power into controlled motor currents while exchanging real-time motion data with higher-level PLCs. This operating role makes it suitable for positioning, indexing, and synchronized axis movement in packaging machines, conveyors, and other automated equipment.
The controller communicates through a MultiEthernet port, so a single hardware interface can be configured for common industrial Ethernet protocols without additional option cards. It accepts a mains supply of 3 × AC 200 to 500 V ±10%, allowing the same device to operate on low- or medium-voltage factory grids. Peak output current is limited to 5 A, which sets the maximum short-term motor torque the unit can deliver. Cooling is provided by internal air cooling through an integrated blower, which keeps the heat sink temperature within safe limits without external ducting. The housing carries an IP20 rating, indicating finger-safe accessibility and the need for installation inside a switch cabinet.
Motion feedback is handled through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, and fieldbus diagnostics can be routed through a separate CANopen channel. Integrated functional safety is delivered by STO (Safe Torque Off) and SBC (Safe Brake Control), enabling power-off torque removal and brake command monitoring up to SIL2/PL d when correctly wired. Energy is exchanged with the DC bus through an infeeding power module, allowing regenerative power to be returned to the supply.
Frequently Asked Questions about HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW:
Q: What type of communication interface does the HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW utilize?
A: This model uses a MultiEthernet communication interface for network connectivity.
Q: How is the HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW cooled?
A: The cooling method is internal air cooling provided through an integrated blower.
Q: What is the peak current capacity of the HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW controller?
A: The device supports a peak current rating of 5 A.
Q: What IP rating does the HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW controller have?
A: The IP20 protection rating means the device is protected against solid objects but not water.
Q: Which safety interface features are included with the HCS01.1E-W0005-A-03-B-ET-EC-CN-L4-NN-FW?
A: Supported safety interfaces include Safe Torque Off (STO) and Safe Brake Control (SBC).
