Product Description:

The HCS01.1E-W0005-A-03-A-ET-EC-NN-S5-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. In an automation cell, it operates as the power stage that converts three-phase mains energy into regulated motor current, allowing coordinated speed or torque control under commands from a higher-level motion controller. This role makes it suitable for axes that must respond quickly to changing load and speed demands during normal machine operation. By housing power electronics, diagnostic logic, and fieldbus connectivity in one enclosure, the unit simplifies cabinet layouts in packaging machines, material-handling axes, and assembly stations.

The controller exchanges process data over MultiEthernet, giving it direct access to EtherNet/IP, PROFINET, and EtherCAT networks without extra hardware. A wide three-phase supply window of 200–500 V AC lets the same model run on 230 V or 400 V plants, while the internal current limit of 5 A is the maximum motor peak demand the converter can support. Heat from the IGBTs is removed by internal blower cooling, which permits mounting inside compact switchgear without external ducting. The housing has an IP20 rating, so live parts remain finger-safe and the device must be installed in a clean electrical cabinet.

The unit is Version 1 in the HCS01 lineup. The feedback socket supports Hiperface/EnDat 2.1/2.2 encoders for absolute position reporting, while the second feedback position is left vacant when a single transducer is sufficient. DC link energy is managed through common DC bus operation, which allows power sharing with regenerative drives in connected systems. The product is part of the HCS01 line and uses the BASIC control section noted in the type code. Its module format also helps conserve panel width in dense control cabinets.