Product Description:

The HCS01.1E-W0005-A-03-A-ET-EC-NN-L3-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. In an automated cell, it receives commands from higher-level logic and modulates motor current to regulate speed and torque between the mains supply and a servo axis. Its compact HCS01 format is intended for cabinet installation where multiple axes share a common DC bus. This layout supports dense multi-axis arrangements without requiring a separate controller housing for each driven function.

This controller accepts a three-phase supply of 200–500 V AC and can deliver a peak output of 5 A to the connected motor windings. Heat generated by the switching devices is removed through internal air cooling that relies on an integrated blower, so no additional external airflow channels are required. The enclosure has an IP20 protection level, which is suitable for installation inside a closed electrical cabinet. Application data and diagnostic traffic move across the built-in MultiEthernet port, which supports several industrial Ethernet protocols without add-on cards. This communication path lets the controller exchange operating data with the rest of the automation system through a single integrated network interface.

Encoder feedback is handled through the first slot, which is factory configured for IndraDyn Hiperface/EnDat 2.1/2.2 encoder feedback. A second interface is intentionally left unequipped, leaving room for a future option without changing the base arrangement. Motion stop functions are implemented by the integrated STO channel, which provides hardware-level torque removal for safety circuits. The hardware corresponds to Design Version 1 of the controller family and is paired with the BASIC control section. The unit uses infeeding and regenerative power sharing, allowing regenerated energy to be shared with adjacent drives.