Product Description:

The HCS01.1E-W0005-A-03-A-ET-EC-DA-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat and belongs to the HCS IndraDrive Controllers series. The unit combines a power stage with integrated control logic so it can manage a single motor axis in automated machinery, conveyors, assembly stations, and other compact motion systems. By modulating the current and voltage delivered to the connected motor, the controller executes precise speed, torque, and position commands supplied by the main PLC or motion platform.

The controller is design version 1, which matches accessories that share the same mechanical footprint. The device can supply up to 5 A of peak output current, which is available for short-term acceleration or load spikes. Its input section accepts 3 x AC 200–500 V ±10%, enabling direct connection to common low- or medium-voltage utility grids without an intermediate transformer. Communication with supervisory systems occurs over MultiEthernet, so protocols such as EtherNet/IP, PROFINET, and EtherCAT can be selected through parameter settings. For cabinet installation, the IP20 enclosure is touch-safe but not sealed against dust or liquids.

The first feedback port supports IndraDyn Hiperface/EnDat 2.1/2.2, allowing absolute encoder data to reach the control loop with high resolution and stable position feedback. Thermal management relies on internal air cooling driven by a blower that moves cabinet air across the heat sink, eliminating the need for external ducts. The power section is classified for infeeding and fed operation, so the unit can return regenerated energy to the DC bus during braking or draw power while motoring. The safety interface is not equipped, so any required safe torque off or emergency-stop circuitry must be implemented by external devices. When paired with a BASIC control section, the controller forms a compact axis package without additional option cards.