Product Description:

Bosch Rexroth Indramat manufactures the HCS01.1E-W0005-A-03-A-CC-EC-PB-L4-NN-FW, a drive controller that belongs to the HCS IndraDrive Controllers series. The unit governs servo and induction motors in modular production lines. It translates digital motion commands into regulated torque and speed for axes that require coordinated positioning and speed regulation. This operating role suits transfer systems, winding stations, and packaging equipment where speed changes and position updates must remain consistent across linked axes.

The power section accepts a three-phase supply of 3 x AC 200–500 V ±10%, allowing the same hardware to operate on low or medium factory mains without tap changes. Under transient load peaks, the controller can deliver up to 5 A, a current limit that matches small and medium-frame motors used on auxiliary axes. Motion commands and diagnostics pass through a SERCOS III master channel that supports synchronized multi-axis profiles and cross-communication between drives. All live parts sit behind an IP20 housing, so installation is restricted to enclosed electrical cabinets. The control section is the ADVANCED version, which provides real-time logic, application-specific technology functions, and integrated parameter storage without external option cards.

Heat is removed by internal air cooling through an integrated blower, eliminating ductwork while keeping component temperatures within design limits. A dedicated fieldbus port offers PROFIBUS connectivity, enabling the controller to exchange process data with PLCs that do not support SERCOS. For machine safety, the drive provides STO and SBC, and these hardware-based circuits cut torque and release brakes without relying on the main CPU. The power interface is specified for infeeding or fed operation, so the unit can either source DC bus power to neighboring drives or receive energy from a separate supply in a common-bus arrangement. The controller also supports encoder feedback from IndraDyn Hiperface and EnDat 2.1/2.2 devices, and it uses design version 1 hardware. This allows one platform to work with common Rexroth motor feedback formats.