Product Description:

Bosch Rexroth Indramat manufactures the HCS01.1E-W0003-A-02-E-S3-EC-NN-L4-NN-FW as part of the HCS IndraDrive Controllers series. This drive controller is intended for compact machine axes where coordinated motion and integrated safety functions must be handled inside a control cabinet. When paired with compatible power units in the HCS01 platform, it supplies regulated current to servo or induction motors and exchanges real-time motion data with higher-level automation systems. Its compact format suits installations where cabinet space is limited but closed-loop drive control is still required.

Communication with the motion system takes place over SERCOS III, which supports deterministic timing for synchronized multi-axis operation. The power section accepts 3 × AC 110–230 V with a tolerance of ±10 percent, allowing connection to common three-phase line supplies used in smaller machinery. A peak output of 3 A supports short acceleration demands before the current returns to its continuous operating range. Thermal management uses internal air cooling through an integrated blower, so no external air duct is required. The enclosure has an IP20 rating, which means the controller is intended for installation inside an electrical cabinet. The unit can also operate in a shared DC bus arrangement with compatible drives.

The control section in this model is the ECONOMY variant, which provides standard motion functions in a reduced hardware format. The drive is Design version 1. Position feedback is handled through an interface that accepts IndraDyn Hiperface/EnDat 2.1/2.2 signals, allowing use with a broad range of compatible servo motors. Integrated safety provides STO and SBC directly in the drive, so safe torque shutdown and brake control can be managed without separate external relay hardware. This arrangement supports cabinet-based motion systems that need compact wiring and direct integration of feedback and safety functions.