HCS01.1E-W0003_A-02-B-ET-EC-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911324986
The Bosch Rexroth Indramat HCS01.1E-W0003_A-02-B-ET-EC-NN-NN-NN-FW is a drive controller in the HCS IndraDrive Controllers series with a peak current of 3 Amps. It features MultiEthernet communication and an IP20 rating, and operates on 3-phase AC voltage from 110 to 230 Volts. The controller uses air cooling with an integrated blower and includes an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface.
Internal Product Review
The HCS01.1E-W0003_A-02-B-ET-EC-NN-NN-NN-FW is an HCS drive controller with MultiEthernet communication that supports efficient machine integration. Operation on 3 x AC 110 to 230 V ±10% and internal air cooling through an integrated blower promote dependable performance in control cabinets. IP20 protection complements the 3 A peak current, making the controller a practical option for light-duty industrial motion control.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0003_A-02-B-ET-EC-NN-NN-NN-FW is a compact drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It regulates servo and induction axes in automated machinery, providing closed-loop speed and torque control while coordinating with higher-level PLCs through its network connections. As an integrated power and control module, the device combines supply, inverter, and logic electronics in a single frame, which helps reduce cabinet space in pick-and-place stations, packaging lines, and material-handling equipment. It is intended for low-power axes that need quick installation and consistent drive behavior within an IndraDrive system.
Its communication backbone is the MultiEthernet interface, which supports Profinet, EtherNet/IP, and EtherCAT protocols without extra hardware. The controller uses the BASIC control section, so motion functions, parameter handling, and diagnostics are managed within the unit. Thermal management relies on internal air cooling through an integrated blower, circulating cabinet air across heat-producing components without external ducting. For transient acceleration events, the inverter can deliver a peak current of 3 A while operating from a three-phase supply rated at 3 x AC 110…230 V ±10%. This combination suits compact machine axes that need integrated networking and low-power drive control in one housing.
Position feedback enters through IndraDyn Hiperface/EnDat 2.1/2.2 encoder feedback, allowing the controller to process absolute position data from compatible single-turn and multi-turn motors. The housing is rated IP20, so the unit must be installed inside a closed electrical cabinet to protect it from dust and incidental contact. The controller is Design Version 1, which identifies the build used in the HCS01 line. Both the auxiliary communication port and the safety interface are not equipped, which keeps the hardware layout compact while leaving the unit focused on its core control and power functions.
