HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911379908
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW is part of the HCS IndraDrive Controllers series and features a MultiEthernet communication interface. This drive controller offers a peak current of 3 Amps and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. It uses air cooling through an integrated blower and has an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW belongs to the HCS IndraDrive Controllers series produced by Bosch Rexroth Indramat. It is an HCS drive controller intended to regulate servo or spindle axes in compact automation cabinets where low power ratings are sufficient. Within a system, the unit provides power conversion, feedback processing, and network connectivity so that motion tasks can be coordinated by a higher-level PLC or motion kernel.
Field communication is handled through a MultiEthernet port, allowing the controller to join EtherNet/IP, PROFINET, or Sercos III networks without additional hardware. Command processing takes place in the BASIC control section, a design option that supplies standard motion functions while omitting advanced safety or technology packages. Thermal management relies on internal air cooling; an integrated blower moves cabinet air across the heat sink, eliminating the need for external ducting. The power stage can deliver a peak current of 3 A, which matches low-inertia servo motors used in small pick-and-place stations or auxiliary axes. Input power is accepted from 3 × AC 110–230 V ±10%, allowing the device to operate on common three-phase mains supplies without a step-down transformer.
An IP20 housing limits touch hazards but requires installation inside an enclosure that offers additional protection. Feedback wiring is terminated on the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, so resolvers or older incremental encoders are not supported without adapters. The DC link supports infeeding and fed operation, meaning the controller can share regenerative energy with other drives on the same bus rather than dissipating it in braking resistors. The unit is not equipped with a dedicated safety input, so machine-level STO or SS1 functions must be provided by upstream contactors or external safety drives when required.
Frequently Asked Questions about HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW controller?
A: The HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW supports a MultiEthernet communication interface for flexible connectivity.
Q: How is the HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW cooled during operation?
A: This drive controller is equipped with an internal air cooling system that uses an integrated blower.
Q: What types of encoder interfaces does the HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW support?
A: The device features an encoder interface compatible with IndraDyn Hiperface and EnDat 2.1/2.2.
Q: What is the peak current rating of the HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW?
A: The peak current for this model is rated at 3 A.
Q: What level of environmental protection does the HCS01.1E-W0003-A-02-B-ET-EC-EP-NN-NN-FW offer?
A: It has an IP20 rating, which provides basic protection against solid objects greater than 12.5 mm.
