HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911328452
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features MultiEthernet communication, operates with a device peak current of 3 Amps, and uses internal air cooling through an integrated blower. This controller offers two encoder interfaces supporting IndraDyn Hiperface or EnDat 2.1/2.2, and has an IP20 rating with a mains voltage of 3 x AC 110 to 230 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW is a compact HCS drive controller produced by Bosch Rexroth Indramat within the HCS01 segment of the HCS IndraDrive Controllers series. As the power component of an IndraDrive axis, it supplies regulated power and motion commands to synchronous or asynchronous motors in modular automation cells. The device works with a detachable control section to close speed, torque, and position loops for conveyors, pick-and-place units, and CNC tooling stations in general industrial automation. This layout keeps the power section compact while allowing the control section to be matched to the application.
Its power input accepts a three-phase supply of 3 x AC 110–230 V ±10%, letting the same hardware operate on low-voltage mains without a transformer. Inside the housing, an integrated blower provides internal air cooling, so the cabinet does not require external ducting for this unit. Under dynamic load, the inverter can deliver a peak current of 3 A, which suits small servo axes and auxiliary drives. The enclosure has an IP20 rating and is intended for mounting inside a closed control cabinet. Network traffic and parameter access are handled through the MultiEthernet interface, which supports Ethernet/IP, PROFINET, EtherCAT, and standard TCP/IP.
The power stage can share a common DC link with neighboring drives and exchange energy during braking events. Encoder feedback is routed through two identical ports that support Hiperface/EnDat 2.1/2.2, making the controller compatible with IndraDyn transducers and similar devices. When paired with a control section of the BASIC design, as noted in the type code, the unit forms a complete axis. The unit is design version 1. It has no safety interface, and it should be used only with the specified control section.
Frequently Asked Questions about HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW use?
A: This drive controller is equipped with a MultiEthernet communication interface for flexible network connectivity.
Q: How is the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW cooled?
A: The cooling method for this model is internal air cooling through an integrated blower.
Q: What is the IP rating for the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW control unit?
A: This drive controller is protected to IP20 standards, providing basic ingress protection.
Q: What mains voltage range is supported by the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW?
A: It supports a mains voltage of 3 x AC 110 to 230 V with a tolerance of plus or minus 10%.
Q: What is the peak current capability of the HCS01.1E-W0003-A-02-B-ET-EC-EC-NN-NN-FW drive controller?
A: The maximum device peak current for this controller is 3 A.
