HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911344558
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series. It features a device peak current of 3 Amps and operates on a mains voltage of 3 x AC 110 to 230 V. The controller provides SERCOS III and PROFIBUS communication interfaces, and includes STO and SBC safety interfaces.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW as part of the HCS IndraDrive Controllers series. This HCS drive controller coordinates power conversion and motion commands for compact servo axes in industrial automation lines, linking the mains supply to motor inverters while handling feedback and fieldbus data within a single enclosure. Its design version is 1 and the control section is classified as ADVANCED, so the internal processor can execute extended drive functions provided by IndraWorks engineering software.
The controller operates from a three-phase supply of 3 × AC 110 to 230 V ±10%, allowing installation on low-voltage plants without an external transformer. A peak output of 3 A permits short acceleration bursts for lighter servo motors, and the unit uses internal air cooling through an integrated blower, eliminating ductwork inside the cabinet. The housing carries an IP20 rating, indicating finger-safe access yet requiring placement in a protected electrical enclosure. A shared power supply concept lets several drives use one line module. No additional design features are specified. Firmware is ordered separately so the software release can be matched to the target machine.
Drive communication relies on the SERCOS III master with cross communication channel for deterministic cyclic data, while an auxiliary PROFIBUS port supports legacy PLC networks. Encoder feedback enters through the multiprotocol IndraDyn encoder interface for Hiperface and EnDat 2.1/2.2, enabling absolute position capture from Rexroth and third-party motors. Functional safety is built in through STO (Safe Torque Off) and SBC (Safe Brake Control), so axes can meet Category 3 and Performance Level d stop requirements without extra relays. Because the line series is HCS01, it integrates mechanically with narrow-width Rexroth power modules for decentralized machine layouts.
Frequently Asked Questions about HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW:
Q: What communication protocol is supported by the HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW controller?
A: This drive controller supports SERCOS III master (cross communication) for its primary communication interface.
Q: What mains voltage does the HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW operate on?
A: The mains voltage required for this controller is 3-phase AC 110 to 230 V with a tolerance of plus or minus 10%.
Q: How is the HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW cooled?
A: This model is cooled internally using an integrated blower for efficient thermal management.
Q: What safety features are included with the HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW?
A: The device is equipped with STO (Safe Torque Off) and SBC (Safe Brake Control) as its safety interfaces.
Q: What is the peak current rating for the HCS01.1E-W0003-A-02-A-CC-EC-PB-L4-NN-FW drive controller?
A: The peak current capability of this controller is 3 A.
