HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911343273
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW is a drive controller with a device peak current of 3 Amps and an IP20 enclosure rating. This controller is part of the HCS IndraDrive Controllers series and features a SERCOS III master communication interface and internal air cooling through an integrated blower. It supports IndraDyn Hiperface and EnDat 2.1/2.2 encoder interfaces and operates with a mains voltage of 3 x AC 110 to 230 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW is a compact controller module manufactured by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. Designed for multi-axis automation, the unit conditions incoming three-phase supply power, regulates motor current, and exchanges real-time data with higher-level CNC or PLC systems. This supports coordinated motion on machine axes where accurate timing, current control, and rapid command updates are required. The module is suited to compact drive cabinets where several axes must operate together within one coordinated control system.
The controller communicates with neighboring drives and PLCs over SERCOS III master (cross communication), which supports deterministic motion profiles and streamlined wiring. Its control section is ADVANCED, so the drive supports extended diagnostics and parameter sets beyond the basic version. Thermal management uses internal air cooling through an integrated blower, moving cabinet air across the heat sink without external cooling devices at the specified load. During acceleration peaks, the inverter can deliver up to 3 A of phase current. Two identical feedback ports accept Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals, allowing either single-cable motor feedback or encoder connections for gantry-style axes.
Protection against accidental contact is rated at IP20, so the controller must be installed inside a closed electrical cabinet. It accepts a mains supply of 3 x AC 110 to 230 V ±10%, which allows use on a wide range of industrial power systems without a separate transformer. Its power stage is configured for infeeding and fed operation, allowing energy sharing or regeneration through a common DC bus. The unit is design version 1 and part of the HCS01 line. The 45 mm housing width also helps it fit compact control cabinets with limited panel space.
Frequently Asked Questions about HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW:
Q: What communication interface is provided on the HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW drive controller?
A: The HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW uses SERCOS III master cross communication for precise motion control networking.
Q: How is the HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW cooled?
A: This drive controller uses an internal air cooling method via an integrated blower.
Q: What types of encoder interfaces are available on the HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW?
A: The device supports encoder interfaces that are compatible with IndraDyn Hiperface and EnDat 2.1/2.2 standards.
Q: What is the device peak current for the HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW?
A: This drive controller is rated for a peak current of 3 A during operation.
Q: What mains voltage range does the HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW support?
A: The HCS01.1E-W0003-A-02-A-CC-EC-EC-S4-NN-FW operates with a mains voltage range of 3 x AC 110 to 230 V ±10%.
