HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911343260
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW is a drive controller from the HCS IndraDrive Controllers series with an IP20 rating and a peak current of 3 Amps. It uses air cooling through an integrated blower and supports SERCOS III master communication with cross communication capability. The controller features dual encoder interfaces for IndraDyn Hiperface and EnDat 2.1/2.2, and operates at 3 x AC 110 to 230 Volt mains voltage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW is a compact drive controller from Bosch Rexroth Indramat in the HCS IndraDrive Controllers series. It serves as the axis regulator in small automation cells by converting motion commands into controlled current for servo or induction motors. Installed in an enclosed cabinet, the unit helps coordinate conveyor lanes, pick-and-place arms, and other low-power motion axes. This arrangement allows the drive to support regulated speed, torque, and position control during repetitive machine cycles. Its compact format is useful where panel space is limited but coordinated motion control is still required.
Its communication interface is SERCOS III master with cross communication, which supports deterministic data exchange among coordinated drives. The fitted control section is classified as ADVANCED, allowing expanded motion functions without an additional option card. Thermal management uses a built-in air blower that moves cabinet air across the heat sink. During acceleration, the power stage can supply a peak phase current of 3 A, which matches small motor loads. The enclosure has an IP20 protection rating, so the controller must be mounted inside a protective cabinet.
The controller accepts a supply range of 3 x AC 110 to 230 V ±10%. It belongs to the HCS01 line, so it matches the mechanical format used by other modules in that platform. Two identical feedback sockets process Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals, allowing absolute position data and commutation information to be handled through the motor feedback connection. Energy is exchanged through the DC bus during operation. The unit is fixed at design version 1, and the safety interface is not equipped, so external circuitry must provide functions such as Safe Torque Off when required.
Frequently Asked Questions about HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW:
Q: What type of communication interface does this drive controller offer?
A: The HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW supports SERCOS III master communication with cross communication capability for advanced network integration.
Q: How is the HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW cooled?
A: This drive controller uses an integrated blower for internal air cooling.
Q: What is the peak current supported by the HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW?
A: The device has a peak output current rating of 3 A.
Q: What is the IP rating of the HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW?
A: It has an IP20 protection rating, making it suitable for installation in clean, dry environments.
Q: What is the mains voltage requirement for the HCS01.1E-W0003-A-02-A-CC-EC-EC-NN-NN-FW drive controller?
A: This model operates with a mains voltage of 3 x AC 110 to 230 V with a tolerance of ±10%.
