HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911377265
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features a MultiEthernet communication interface, supports IP20 protection, and has a peak current of 18 Amps. The controller uses an internal air cooling method through an integrated blower and operates with a mains voltage of 3 x AC 200 to 500 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW is a single-axis drive controller in the HCS IndraDrive Controllers series from Bosch Rexroth Indramat. It combines power conversion, motion control, and communication in one housing to operate servo or asynchronous motors in conveyors, pick-and-place systems, and similar automated equipment. By converting incoming three-phase power into controlled motor output, the unit supports accurate current and voltage regulation during positioning and speed-control tasks. Its integrated design helps reduce the number of separate modules needed for a compact machine axis and keeps power, feedback, and network functions in one device.
The controller accepts a mains supply of 3 x AC 200…500 V ±10%, allowing use across a broad industrial voltage range. During short acceleration peaks, the inverter can deliver up to 18 A of peak current to support temporary overload demand. The enclosure has an IP20 rating, so the unit is intended for installation inside a control cabinet. Network communication is handled through the MultiEthernet interface, and motor feedback is connected through an Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port for compatible encoder systems. This combination allows the drive to exchange command data with the control system while also receiving rotor position signals needed for closed-loop operation.
A separate motion bus uses CANopen for real-time coordination with other machine components. The installed control section is the BASIC variant, which provides the core control functions for standard axis applications. Thermal management uses internal air cooling through an integrated blower, which removes heat without external ducting. The power stage supports an infeeding and feeding DC-link concept, allowing regenerated energy to be shared with other connected axes. This arrangement is useful in multi-axis systems where one axis can absorb energy returned by another during braking.
Frequently Asked Questions about HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW drive controller?
A: This model features a MultiEthernet communication interface, enabling versatile network connectivity.
Q: What is the device peak current for this HCS IndraDrive Controller model?
A: The HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW provides a peak current of 18 A, supporting high-demand applications.
Q: How is the HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW cooled?
A: Cooling is achieved through internal air circulation using an integrated blower in this controller.
Q: What mains voltage range does the HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW support?
A: This controller operates with a 3-phase AC voltage range of 200 to 500 V with ±10% tolerance.
Q: What is the IP rating of the HCS01.1E-W0018-A-03-B-ET-EC-CN-S4-NN-FW?
A: The protection level for this drive controller is IP20, providing basic protection against solid objects.
