HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911338479
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features MultiEthernet communication, CANopen, and encoder interfaces supporting IndraDyn Hiperface and EnDat 2.1/2.2. The controller has a device peak current of 18 Amps, uses internal air cooling with an integrated blower, and holds an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW is an HCS01 drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It serves as the power and control interface between an industrial supply bus and a servo or induction motor, providing closed-loop current, speed, and position control in compact cabinets. By interpreting commands from higher-level controllers and regulating three-phase output, it supports accurate axis motion in handling, printing, and similar automated equipment. For plant communication, the unit includes a MultiEthernet port that supports PROFINET, EtherNet/IP, and EtherCAT without an external gateway. Motor feedback is handled through an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, and a separate CANopen channel can be used for decentralized I/O or compatible sensor devices.
The power stage accepts a mains input of 3 x AC 200 to 500 V ±10%, which allows the same controller to operate on several common industrial voltage systems. During acceleration or braking, the output bridge can supply up to 18 A of peak current for short overload demands. That current capacity helps the drive handle brief dynamic loads during rapid speed changes. Heat is removed by internal air cooling through an integrated blower, so cabinet air passes across the heat sink without external ducting. The enclosure is rated IP20, which means the controller is intended for installation inside a closed electrical cabinet rather than in open machine areas.
The control section is classified as Basic, so the unit provides standard motion functions without integrated Safe Torque Off. Because the safety interface is not equipped, any required machine safety functions must be implemented by external circuitry. Its power supply arrangement supports infeeding and fed operation, allowing the controller to draw energy from or return energy to a common DC bus in multi-axis systems. This arrangement supports shared energy flow on coordinated axes during repeated acceleration and deceleration cycles.
Frequently Asked Questions about HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW:
Q: What kind of communication interface does the HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW controller use?
A: This controller is equipped with a MultiEthernet communication interface for flexible network integration.
Q: What is the device peak current supported by this HCS IndraDrive controller?
A: The HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW can handle a peak current of 18 A during operation.
Q: What cooling method is implemented in the HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW controller?
A: Cooling for this model is handled internally through an integrated blower, providing air-based cooling within the unit.
Q: What mains voltage range is supported by the HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW?
A: This drive controller is rated for a mains input voltage of 3 x AC 200 to 500 V ±10%.
Q: What IP rating does the HCS01.1E-W0018-A-03-B-ET-EC-CN-NN-NN-FW drive controller have?
A: The controller has an IP20 protection rating, suitable for installations with limited exposure to dust and no protection from liquids.
