HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384659
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW is part of the HCS IndraDrive Controllers series and functions as a drive controller with a device peak current of 18 Amps. It features a MultiEthernet communication interface and an IP20 rating, with air cooling provided by an integrated blower. The controller supports encoder interfaces including IndraDyn Hiperface and EnDat 2.1/2.2, and operates on a mains voltage of 3 x AC 200 to 500 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW belongs to the HCS IndraDrive Controllers series from Bosch Rexroth Indramat. It is an AC drive controller that regulates torque, speed, and position for servo and induction motors used in automated machinery. As part of the compact HCS01 line, the unit combines power conversion, motion control, and diagnostic functions in a space-saving format. This arrangement helps support decentralized axis layouts where cabinet space and wiring density must be kept under control.
This controller accepts a three-phase mains supply of 3 × AC 200…500 V ±10%, allowing operation on a wide range of industrial power systems. Thermal management uses internal air cooling through an integrated blower, which helps remove heat from the power electronics without external ducting. The enclosure has an IP20 rating, so it is finger-safe but intended for installation inside a closed electrical cabinet. Peak motor current reaches 18 A, which supports short-term acceleration and braking on moderate-power axes. Network communication is handled through a MultiEthernet interface, allowing the controller to work with several industrial Ethernet systems when paired with the appropriate control setup.
The unit is built in Design 1, which keeps its mechanical layout and terminal arrangement consistent within the HCS01 range. The encoder connection supports IndraDyn Hiperface/EnDat 2.1/2.2 feedback devices, allowing position data to be read from compatible single-turn or multi-turn systems. DC bus energy sharing is supported by an infeeding and fed power stage, which allows braking energy to be exchanged between connected drives. The controller uses the Control Section BASIC (B), providing a streamlined configuration for standard motion tasks. A second encoder connection or I/O expansion slot is not equipped, and no added design options are installed in this version.
Frequently Asked Questions about HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW:
Q: What type of communication interface is provided on the HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW controller?
A: The HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW features a MultiEthernet communication interface for network connectivity.
Q: What is the device peak current for the HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW?
A: This drive controller supports a device peak current of 18 A.
Q: How is the HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW cooled?
A: Cooling is achieved with internal air circulation using the integrated blower.
Q: What is the IP rating of the HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW controller?
A: The HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW is rated at IP20, providing basic protection against solid objects.
Q: What mains voltage range does the HCS01.1E-W0018-A-03-A-ET-EC-NN-S5-NN-FW support?
A: This controller operates with a mains voltage range of 3 x AC 200 to 500 V ±10%.
