Product Description:

The HCS01.1E-W0018-A-02-B-ET-EC-NN-S5-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It functions as the command and power stage between the facility mains and a connected servo or induction motor, delivering regulated current and field-oriented control for coordinated motion in automated production lines. In automated machinery, that role lets the controller translate motion commands into stable torque and speed behavior at the motor shaft. The product belongs to the HCS01 line and operates as part of the IndraDrive controller platform.

The controller handles a three-phase supply of 3 × AC 110…230 V ±10 %, matching common low-voltage service panels found in industrial cabinets and compact machine power sections. During acceleration peaks, it can supply up to 18 A to the motor windings, and the power section is enclosed in an IP20 housing cooled by an internal blower to move heat away from internal components. Network traffic is exchanged over MultiEthernet, allowing direct use of PROFINET, EtherNet/IP, or EtherCAT without option cards or external gateway modules. Parameter processing is handled by the factory-installed BASIC control section, and the drive can return excess energy to the DC link during regenerative operation instead of releasing that energy as heat inside the enclosure.

To integrate feedback devices, the drive provides an encoder interface for IndraDyn Hiperface and EnDat 2.1/2.2, while the second feedback channel is not equipped, which simplifies wiring in single-encoder axes. The unit is marked as design version 1, identifying the design generation used for this model. Power is exchanged with the common DC bus through an infeeding supply stage, enabling energy sharing among adjacent drives in the same system. No auxiliary mechanical additions are included, so the configuration remains centered on the main power, control, communication, and feedback functions of the drive.