HCS01.1E-W0018-A-02-B-ET-EC-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911332179
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-B-ET-EC-NN-NN-NN-FW is a drive controller from the HCS IndraDrive Controllers series featuring a MultiEthernet communication interface and a device peak current of 18 Amps. This controller uses internal air cooling through an integrated blower, is rated at IP20, and supports mains voltages from 110 to 230 Volts AC.
Internal Product Review
The HCS01.1E-W0018-A-02-B-ET-EC-NN-NN-NN-FW is a Bosch Rexroth Indramat HCS IndraDrive controller featuring MultiEthernet communication and an integrated blower for efficient internal air cooling. Its 18 A peak current capacity and IP20 protection make it suitable for a range of light to medium-duty automation tasks. Compact design and encoder compatibility allow for flexible integration in diverse industrial environments.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-02-B-ET-EC-NN-NN-NN-FW is an AC drive controller manufactured by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. As a compact single-axis converter, it coordinates torque, speed, and position loops for servo and induction motors used in factory automation cells, packaging lines, and material-handling stations. By combining the power stage with a modular control board, the unit supplies the closed-loop regulation needed for precise motion while supporting panel mounting inside electrical enclosures. This arrangement helps keep the drive package compact for machines that need accurate axis control in a cabinet-mounted layout.
The power section is matched to low-voltage utility grids and accepts a three-phase supply of 3 x AC 110…230 V ±10%, so the same hardware suits 120 V or 208 V plants without tap changes. From this input, the converter can source up to 18 A of peak current to the connected motor, which is suitable for small and medium servo axes. This current capacity supports acceleration and short load peaks during normal axis movement. Thermal energy is removed by internal air cooling through an integrated blower, eliminating external ducting. Cabinet ingress protection is limited to IP20, so the unit must be installed inside a closed panel. Network data and drive commands are exchanged through a MultiEthernet port that supports several real-time Ethernet protocols.
The control section supplied with this hardware is the BASIC variant in design version 1, and it mates to the HCS01 power stage without additional wiring. Position feedback is handled through the configurable Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port, allowing compatibility with supported motor feedback systems, while a second encoder channel and a safety interface are not installed. Leaving those interfaces out keeps the configuration focused on the installed control functions. The unit uses an infeeding and fed DC-bus connection, so it can act as either an energy source or an energy consumer when several drives operate on a common supply.
