HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911393698
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It has a device peak current of 13 Amps and uses an internal air cooling system with an integrated blower. The controller features a MultiEthernet communication interface and supports both IndraDyn Hiperface/EnDat 2.1/2.2 encoder and encoder emulation, with an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW is a drive controller built by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It converts incoming mains power into controlled output for servo applications and manages the feedback processing needed for accurate axis response in compact machine cells. The unit belongs to the HCS01 line, so it fits installations that need a compact control stage with network communication for coordinated motion. This arrangement suits automated equipment that needs cabinet-mounted servo control without using a larger standalone drive platform.
The controller accepts a three-phase supply of 3 x AC 110...230 V ±10%, allowing operation from low-voltage factory mains without an external transformer. During dynamic demand, current peaks can reach 13 A, giving a paired servo motor short bursts of torque during acceleration or braking. Heat is removed by internal air cooling through an integrated blower, so thermal management remains contained within the unit. Communication and diagnostics use MultiEthernet, allowing the controller to exchange drive data over supported real-time networks through one interface. The housing has an IP20 rating, so the controller is intended for installation inside a protected electrical enclosure.
Feedback handling is divided across dedicated ports to support different signal needs within the same axis system. One channel accepts IndraDyn Hiperface or EnDat 2.1/2.2 encoder feedback for absolute position data, while another provides encoder emulation so external controls can receive incremental-style signals. Power is introduced through an infeeding module that allows regenerated energy to return to the DC bus during deceleration. The control section uses the BASIC type, which corresponds to the B code in the model designation. The unit is built as design version 1, firmware is ordered separately to match the application, and no supplementary design features are included.
Frequently Asked Questions about HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW:
Q: What is the communication interface for the HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW drive controller?
A: The HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW uses a MultiEthernet communication interface for connectivity.
Q: What is the maximum device peak current for the HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW controller?
A: This model supports a device peak current of 13 A for demanding applications.
Q: What mains voltage range does the HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW support?
A: The HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW operates on a three-phase mains voltage range of 110 to 230 V ±10%.
Q: How is the HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW cooled?
A: This controller is cooled by internal air circulation through an integrated blower.
Q: What is the IP protection rating of the HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW?
A: The HCS01.1E-W0013-A-02-B-ET-EC-EM-S5-NN-FW has an IP20 protection rating.
