HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345360
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It supports MultiEthernet communication and features a device peak current of 13 Amps. The controller is cooled by internal air through an integrated blower and has an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW is a drive controller produced by Bosch Rexroth Indramat and assigned to the HCS IndraDrive Controllers series. It mounts vertically on a DIN rail and forms the power-conversion and regulation core of a single motion axis in automated machinery. By rectifying incoming AC power and modulating the resulting DC link, the unit supplies controlled current to servo or induction motors. It also synchronizes axes with millisecond precision and exchanges real-time status data with upper-level PLCs. This arrangement lets the controller manage acceleration, deceleration, and steady-state motor operation on a dedicated axis.
Within the power stage, the device can deliver a peak of 13 A, allowing the short-term overloads needed for rapid indexing. It accepts a utility supply of 3 × AC 110…230 V ±10%, so the same hardware can be used on low-voltage grids in different regions. The integrated MultiEthernet gateway supports PROFINET, EtherNet/IP, and EtherCAT communication without requiring an external fieldbus card. An internal blower provides forced-air cooling, and the enclosure is rated IP20, so the drive is intended for cabinet installation. For position feedback, the control section offers a first interface for IndraDyn Hiperface and EnDat 2.1/2.2 encoders, allowing direct connection of high-resolution absolute encoders. This allows direct integration into Ethernet-based control systems while keeping encoder wiring on the drive. The BASIC control-section designation indicates the standard control configuration.
A secondary channel provides encoder emulation, enabling the drive to back-feed incremental signals to legacy CNC or PLC equipment. The common DC bus topology is infeeding / feeding, which routes regenerated power to accelerating drives. The unit is Design Version 1 and belongs to the HCS01 line series, which keeps the housing compact at 45 mm of cabinet width. This narrow housing suits cabinet layouts where DIN-rail space is limited and adjacent components are closely packed. No auxiliary design features are included, and firmware is ordered separately rather than being factory-installed.
Frequently Asked Questions about HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW:
Q: What is the mains voltage range supported by the HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW drive controller?
A: This model supports a mains voltage input of 3 x AC 110...230 V ±10%.
Q: What is the device peak current of the HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW?
A: The HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW provides a peak current rating of 13 A for demanding applications.
Q: What cooling method does the HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW use?
A: Cooling is handled internally with an integrated blower using air.
Q: What type of communication interface does the HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW use?
A: The drive controller features a MultiEthernet communication interface for flexible network integration.
Q: What level of protection does the HCS01.1E-W0013-A-02-B-ET-EC-EM-S4-NN-FW provide according to its IP rating?
A: The IP20 protection rating indicates that this controller is protected against solid objects over 12 mm but not against water.
