HCS01.1E-W0013-A-02-B-ET-EC-EM-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345410
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-EM-L4-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features a device peak current of 13 Amps, operates on 3-phase AC between 110 and 230 Volts, and uses an internal air cooling method with an integrated blower. The controller supports MultiEthernet communication and includes both STO Safe Torque Off and SBC Safe Brake Control safety interfaces.
Internal Product Review
The HCS01.1E-W0013-A-02-B-ET-EC-EM-L4-NN-FW is a Bosch Rexroth IndraDrive controller featuring MultiEthernet communication and an integrated internal air blower for efficient cooling. With a peak device current of 13 A and advanced safety interfaces like STO and SBC, this drive controller is well-suited for demanding motion control applications. The IP20 rating and encoder support further enhance its versatility in industrial settings.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-B-ET-EC-EM-L4-NN-FW is a drive controller produced by Bosch Rexroth Indramat and supplied within the HCS IndraDrive Controllers series. It belongs to the HCS01 line and is identified as design version 1 under the manufacturer’s naming system. As an HCS drive controller, it regulates power to synchronous or asynchronous motors in industrial automation, delivering closed-loop velocity and torque control while integrating into the machine’s safety circuit and fieldbus architecture. This allows the unit to support coordinated axis motion in automated equipment where stable motor control and reliable communication are required.
This unit accepts three-phase mains of 3 x AC 110…230 V ±10%, making it suitable for low-voltage supply networks. Power is conditioned internally and can be returned to the DC bus because the power section is classified as infeeding / fed. Thermal management is handled by internal air cooling through an integrated blower, so cabinet airflow must support the built-in fan path. A device peak current of 13 A indicates the short-term output capability during acceleration or rapid load changes. Ingress protection is rated at IP20, which provides finger-safe touch protection but requires installation inside a control cabinet. Network wiring is simplified by the Multi-Ethernet communication interface, allowing direct connection to EtherNet/IP, PROFINET IO, EtherCAT, Sercos over Ethernet, or standard TCP/IP without optional cards.
The control section specified as BASIC pairs mechanically and electrically with this power module. Feedback processing is versatile: Interface 1 supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals for absolute position data, while Interface 2 provides encoder emulation output so legacy drives can read incremental quadrature or analog sin/cos. This arrangement allows the controller to work with modern motor feedback while still supplying a usable output for connected equipment that expects a different signal format. Functional safety is integrated by the dual-channel STO (Safe Torque Off) and SBC (Safe Brake Control) interface, enabling immediate torque shutdown and coordinated brake release when a safety controller demands it.
