HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911395022
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW is an HCS IndraDrive Controller with a MultiEthernet communication interface and a device peak current of 13 Amps. It features two encoder interfaces supporting IndraDyn Hiperface and EnDat 2.1/2.2, and operates with an internal air cooling method using an integrated blower. The controller has an IP20 rating and accepts a mains voltage of 3 x AC 110 to 230 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It combines a power section and control electronics to regulate servo and induction motors in automated production cells, conveyors, and material-handling stations. The device coordinates torque, speed, and position loops so that machine axes follow command profiles precisely and repeatably within a centralized automation architecture. This arrangement lets one compact unit handle motor power conversion and closed-loop motion control in the same housing.
The controller communicates with higher-level PLCs through a MultiEthernet port that supports several real-time Ethernet protocols without additional hardware. Its control section is supplied in the BASIC configuration, which provides standard motion functions for typical axis control tasks. Thermal management relies on internal air cooling that draws cabinet air through an integrated blower to remove heat from the power stage. The unit delivers a device peak current of 13 A, allowing short-term torque surges during acceleration or braking. For protection, it carries an IP20 enclosure rating, which provides finger-safe access and requires installation inside a closed panel. The mains supply is 3 x AC 110–230 V with a ±10% tolerance, making the controller suitable for low-voltage three-phase networks used in compact assembly equipment and similar machinery.
The hardware uses design version 1 within the HCS01 line. Both feedback connectors accept Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals, so the same drive can be paired with linear or rotary motors that use digital sine-cosine feedback or EnDat absolute encoders. The power section is classified for infeeding and fed operation, which means it can return regenerative energy to a shared DC bus during braking and can also operate as a stand-alone supply when no shared bus is present. This gives the controller flexibility in both single-axis layouts and multi-axis systems that exchange braking energy through a common DC link.
Frequently Asked Questions about HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW:
Q: What cooling method does the HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW drive controller utilize?
A: The HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW controller uses integrated air cooling through its internal blower.
Q: What is the maximum device peak current supported by the HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW?
A: This drive controller handles a peak device current of 13 A during operation.
Q: Which communication interface is available on the HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW?
A: MultiEthernet is provided as the communication interface for this controller, enabling flexible network connections.
Q: What types of encoder interfaces are offered on the HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW?
A: The controller supports dual encoder interfaces with IndraDyn Hiperface and EnDat 2.1/2.2 compatibility.
Q: What mains voltage range does the HCS01.1E-W0013-A-02-B-ET-EC-EC-SB-NN-AW support?
A: This model operates on a mains voltage of 3 x AC 110...230 V with a tolerance of ±10%.
