HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911385521
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features MultiEthernet communication and offers a device peak current of 13 Amps. This controller has an IP20 rating, runs on a mains voltage of 3 x AC 110 to 230 Volts, and is cooled internally through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW is an HCS drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. As a drive controller, it supplies regulated power to compatible synchronous or asynchronous motors while exchanging status data with higher-level PLCs over the selected network. It is suited for industrial automation tasks that require controlled speed, torque, and coordinated axis movement. This helps the controller fit conveyors, handling axes, and general machine modules that depend on steady motor response under varying loads. Its modular layout also fits compact cabinet installations where several motion functions are grouped in the same machine section.
The controller communicates over a MultiEthernet interface, allowing direct integration with EtherNet/IP, PROFINET, and other TCP/IP-based networks without extra hardware. It has a device peak current of 13 A, which provides short-term output for acceleration and changing load conditions. The power stage operates from 3 x AC 110...230 V ±10%, making it suitable for low-voltage machine power systems. Thermal management uses internal air cooling through an integrated blower, so the fan moves air across the heat sink without external ducting. The enclosure has an IP20 rating, which helps protect against accidental contact with live parts, but the unit should still be installed inside a control cabinet.
Feedback wiring connects to an Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port for motor feedback and position data. Secondary reference signals are available through Encoder emulation, which can support legacy drive arrangements or linked axis functions. The DC bus works with an infeeding and regenerative power module, allowing energy exchange across connected inverters during operation and deceleration. Shared DC-bus operation can reduce wasted braking energy when multiple axes accelerate and decelerate at different times. The unit is Design Version 1. Integrated safety functions are not included, so safe torque off and emergency stop requirements must be handled by external safety hardware when the machine design calls for them.
Frequently Asked Questions about HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW:
Q: What communication interface is offered by the HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW drive controller?
A: The HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW utilizes MultiEthernet for its communication interface, allowing flexible network integration.
Q: What cooling method is used in the HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW drive controller?
A: Internal air cooling is provided by an integrated blower in this device.
Q: What is the peak current capability for the HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW controller?
A: This unit can deliver a peak device current of up to 13 A.
Q: What is the IP protection rating of the HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW controller?
A: The HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW is rated for IP20 protection, suitable for protected environments.
Q: What mains voltage range does the HCS01.1E-W0013-A-02-A-ET-EC-EM-NN-NN-FW support?
A: This model is designed for operation with 3-phase AC mains voltage ranging from 110 to 230 V ±10%.
