HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911376544
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW is part of the HCS IndraDrive Controllers series and serves as an HCS drive controller. It features a MultiEthernet communication interface and supports mains voltage of 3 x AC 110 to 230 volts. The device offers a peak current of 9 Amps and uses air cooling through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactured the HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW. This model belongs to the HCS IndraDrive Controllers series and functions as a drive controller that converts commanded motion profiles into regulated current and voltage for servo or induction motors. It is intended for compact multi-axis stations where axis-specific control, protective shutdown, and diagnostic feedback are required. The controller links a PLC-based motion layer to the power electronics that energize connected actuators, allowing speed, torque, and position commands to be translated into stable motor response during automated cycles. Because control, shutdown handling, and diagnostics are integrated in one unit, the drive can monitor axis status while responding to commands from the higher-level control system.
The controller accepts a three-phase supply of 3 x AC 110–230 V ±10%, letting it share the same low-voltage bus as small factory machinery. Inside the housing, internal air cooling driven by an integrated blower removes switching heat without additional ducting. Rated drive output reaches 9 A of peak current, so short acceleration bursts can be delivered to light-duty motors. Field connectivity is handled through a Multi-Ethernet port that supports common industrial Ethernet protocols over a single RJ-45 jack. Motor feedback is processed through an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, enabling absolute position capture and electronic nameplate reading. An IP20 enclosure rating permits installation inside a closed control cabinet where direct liquid exposure is not expected. The internal power section can operate in either infeeding or fed mode, allowing the unit to supply or share a common DC link according to the cabinet layout.
The control electronics are delivered in the BASIC configuration, matching the associated drive section. Within the HCS01 line, the device carries Design Version 1, so parameter files must match that revision. A second feedback channel is not equipped, which suits single-encoder axes and keeps the interface layout simple. This arrangement supports applications that do not require redundant motor feedback or an additional auxiliary encoder input. It is suited to cabinet layouts where one feedback device is sufficient for closed-loop operation and the axis does not require a second encoder path.
Frequently Asked Questions about HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW:
Q: What communication interface is included with the HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW drive controller?
A: The HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW supports MultiEthernet for communication.
Q: How is the HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW drive controller cooled?
A: This model utilizes internal air cooling with a built-in blower for thermal management.
Q: What is the peak current capacity for the HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW controller?
A: The HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW is designed to deliver a device peak current of 9 A.
Q: What is the acceptable mains voltage range for the HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW device?
A: This drive controller operates with a mains voltage of 3 x AC 110...230 V ±10%.
Q: What level of environmental protection does the HCS01.1E-W0009-A-02-B-ET-EC-NN-S5-NN-FW provide?
A: It has an IP20 rating, meaning it is protected against solid objects larger than 12 mm but not against water.
