HCS01.1E-W0009-A-02-B-ET-EC-NN-NN-AA-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331042
Ask for AvailabilityThe Bosch Rexroth Indramat HCS01.1E-W0009-A-02-B-ET-EC-NN-NN-AA-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller features a MultiEthernet communication interface and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. It uses internal air cooling with an integrated blower and is designed with IP20 protection while operating with a peak current of 9 Amps.
Internal Product Review
The HCS01.1E-W0009-A-02-B-ET-EC-NN-NN-AA-FW is a drive controller from the HCS IndraDrive series, featuring MultiEthernet connectivity and a peak current rating of 9 A. An internal air cooling system with an integrated blower ensures efficient thermal management, and an IP20 rating supports safe installation in standard control cabinets. Combining these features, this unit is a highly effective solution for precise motion control in automation environments.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-B-ET-EC-NN-NN-AA-FW is a drive controller manufactured by Bosch Rexroth Indramat and supplied within the HCS IndraDrive Controllers series. As an axis inverter, it couples directly to plant mains and delivers regulated three-phase output for servo and asynchronous motors used in material-handling cells, packaging machinery, and pick-and-place stations. It regulates motor voltage and current so commanded speed and torque can be maintained during cycle changes and load variations. Integrating motion functions into the drive helps reduce cabinet space and keeps power and control hardware concentrated in one enclosure. This layout supports compact machine panels where several automation modules must be installed side by side.
The power section accepts 3 × AC 110…230 V ±10%, so the same unit can operate from single-phase or low-voltage three-phase supplies. Internally it can provide up to 9 A of peak current during short acceleration periods. Thermal limits are managed by internal air cooling through an integrated blower, which moves cabinet air across the heat sink. Because the cooling method uses enclosure air, the panel must provide a clear airflow path around the drive. A Multi-Ethernet port supports EtherNet/IP, PROFINET, and EtherCAT from one connector, and the housing has an IP20 rating for finger-safe installation inside an electrical enclosure.
The controller is supplied with the BASIC control section in design version 1, which suits standard single-axis applications. Feedback is handled through the integrated IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, while the secondary encoder slot and safety interface are not equipped. Without those additional interfaces, the hardware is arranged for one primary motor feedback channel rather than expanded feedback or safety functions. The power module supports infeeding or fed operation, so it can draw DC-bus energy from an external supply or provide it to additional axes. Within the HCS01 line, this power section is paired with BASIC control sections only.
