Product Description:

The HCS01.1E-W0009-A-02-B-ET-EC-NN-L3-NN-AW is a compact drive controller in the HCS IndraDrive Controllers series. It governs individual servo or induction motors in packaging lines, material-handling modules, and light assembly stations. Acting as the power and control layer between the plant PLC network and the connected actuator, the unit modulates current, monitors feedback, and executes shutdown functions so that mechanical motion follows programmed profiles with repeatable accuracy. Because it shares mounting dimensions with other units in the HCS01 line, it can be installed on the same DIN rail without cabinet rework.

Communication is handled through Multi-Ethernet, allowing parameter access through PROFINET, EtherNet/IP, or EtherCAT without option cards. The BASIC control section supports standard motion functions such as point-to-point positioning, velocity control, and torque limiting for typical single-axis tasks. Heat is removed by internal air cooling through an integrated blower, which supports thermal stability in compact cabinet layouts. For short acceleration peaks, the inverter can deliver up to 9 A per phase. Position and speed signals are processed through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, while the second feedback connection is left vacant to keep wiring straightforward.

The enclosure has an IP20 rating, so the controller is intended for installation inside a cabinet with clean, controlled airflow. It operates from 3 x AC 110 to 230 V ±10%, which allows use on a wide range of low-voltage supply networks. Integrated STO (Safe Torque Off) provides a safety function for stopping torque generation when required by the machine design. The power section supports infeeding and fed operation, allowing energy to move in both directions during motor operation. This version uses the standard configuration for the series and does not add extra optional features.