HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911336373
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series. It features an ADVANCED control section design, supports a SERCOS III master communication interface, and is rated for a peak current of 9 Amps. The device uses internal air cooling with an integrated blower and operates at 3-phase AC mains voltages from 110 to 230 V with an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW drive controller is manufactured by Bosch Rexroth Indramat and belongs to the HCS IndraDrive Controllers series. Within an automation cell, it serves as the power and control stage between the mains supply and servo motors. It regulates current, processes encoder feedback, and coordinates motion commands from the machine PLC. It is intended for coordinated axis operation where accurate current control and timely feedback exchange are necessary for repeatable motion.
Communication is handled through the SERCOS III master with cross communication interface, enabling deterministic bus cycles between multiple drives. The control section is the ADVANCED variant, so advanced motion functions such as electronic gearing or camming can run locally instead of being passed back to the higher-level control. Thermal management uses internal air cooling through an integrated blower, which moves cabinet air across the heat sink without external ducting. During acceleration, the power stage can deliver 9 A of peak current, and the base unit supports IndraDyn Hiperface or EnDat 2.1/2.2 encoder feedback for direct connection of compatible absolute encoders. This combination supports closed-loop positioning and speed control without requiring a separate feedback converter in the basic unit.
The power section is rated for line supplies of 3 x AC 110…230 V ±10%, allowing use across low- and medium-voltage installations that fall within that range. Energy flows through an infeeding and fed topology, so braking energy from one module can be placed on the shared DC bus and used by another axis during motoring. That arrangement can reduce wasted braking energy when several axes share a common DC bus during changing load conditions. Protection is limited to IP20, so the controller must be installed inside a closed control cabinet with managed airflow and protection from direct contact. The unit is Design Version 1, and this configuration does not include populated safety or secondary communication slots.
Frequently Asked Questions about HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW:
Q: What type of communication interface is provided on the HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW controller?
A: This unit supports SERCOS III master communication with cross communication capability.
Q: What is the device peak current rating for the HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW?
A: The peak current supported by this drive controller is 9 A.
Q: What cooling method does the HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW utilize?
A: Cooling is achieved internally using an integrated blower for air circulation.
Q: What is the IP rating for the HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW drive controller?
A: The HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW has an IP20 protection rating, indicating basic protection against solid objects.
Q: What mains voltage range is required by the HCS01.1E-W0009-A-02-A-CC-EC-NN-NN-NN-FW?
A: This controller operates on a mains voltage of 3 x AC 110 to 230 V with a tolerance of ±10%.
