HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911338056
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW is part of the HCS IndraDrive Controllers series and features a SERCOS III master communication interface. This drive controller uses internal air cooling with an integrated blower, has a peak current of 9 Amps, and operates at 3 x AC 110 to 230 Volts with ±10% tolerance. It provides STO Safe Torque Off and SBC Safe Brake Control safety interfaces, and has an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW drive controller is produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Supplied as design version 1, this unit serves as a compact power and regulation stage for servo axes in packaging, printing, and general automation lines. As an HCS drive controller, it conditions incoming three-phase mains power, performs closed-loop current control, and communicates status data to a plant-level PLC so that motion sequences remain synchronized. Its compact format makes it suitable for cabinet installations where coordinated axis control is required without the larger footprint of higher-power drive classes.
For deterministic multi-axis coordination, the controller includes a SERCOS III master (cross communication) port. Its control section uses the ADVANCED design, and thermal management is handled by internal air cooling through an integrated blower rather than external ducting. Peak output capability reaches 9 A, allowing the drive to operate small to mid-frame IndraDyn motors during acceleration and regulated motion. The input range of 3 x AC 110 to 230 V ±10% supports use with different plant supply systems, and the unit is not equipped with a second encoder interface.
The enclosure has a protection rating of IP20, so it is intended for installation inside a closed control cabinet. Motor feedback is connected through a single interface that accepts Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals for position capture and drive control. Integrated safety includes STO (Safe Torque Off) and SBC (Safe Brake Control), allowing the drive to remove motor torque and manage the brake control path through built-in safety functions. The power section is intended for infeeding and fed operation, so it can receive DC bus energy from an upstream supply and exchange regenerated energy with neighboring drives on the same system.
Frequently Asked Questions about HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW controller?
A: The HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW supports SERCOS III master for cross communication.
Q: How is the HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW cooled?
A: This drive controller uses internal air cooling through an integrated blower for temperature management.
Q: What is the peak current supported by the HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW?
A: The device can handle a peak current of 9 A during operation.
Q: What is the allowed mains voltage range for the HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW?
A: This model has a mains voltage range of 3 x AC 110...230 V with a tolerance of ±10%.
Q: What safety interfaces are provided on the HCS01.1E-W0009-A-02-A-CC-EC-NN-L4-NN-FW drive controller?
A: The controller features STO (Safe Torque Off) and SBC (Safe Brake Control) as its safety interface options.
