Product Description:

The HCS01.1E-W0009-A-02-A-CC-EC-NN-L3-NN-FW belongs to the HCS IndraDrive Controllers series from Bosch Rexroth Indramat. It is a drive controller for servo axes and induction motors in modular automation lines, supplying regulated power while exchanging motion commands with a higher-level PLC. Its integrated control and power sections let the unit manage acceleration, speed, and position loops in compact machines that require synchronized multi-axis operation. This arrangement suits equipment that needs coordinated starts, stops, and speed changes across several axes.

This controller links to plant networks through a SERCOS III master (cross communication) port, allowing deterministic data exchange among drives and PLCs. Thermal management relies on internal air cooling, and an onboard blower moves cabinet air across the heat sink without external ducting. The mains input accepts 3 × AC 110…230 V ±10%, so the unit can be connected to low-voltage three-phase supplies used in small cells or test stands. During rapid load changes, the power stage can deliver a peak phase current of 9 A for short bursts of extra motor torque. The control section is classified as ADVANCED, which adds extended control functions for feedback handling and parameter transfer.

The open-style housing has an IP20 rating, so it must be installed inside a protective cabinet while still allowing access to pluggable terminals. A certified STO (Safe Torque Off) circuit removes gate signals to the IGBTs for safety without disconnecting the mains supply. Feedback wiring connects through the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface, allowing the drive to process absolute position signals for closed-loop motor control. DC bus energy is managed by the built-in supply stage labeled Infeeding / Feeded, which supports shared DC-link topologies and regenerative braking back to the mains where local code allows it.