HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911338048
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW is part of the HCS IndraDrive Controllers series and is an ADVANCED design drive controller. It supports communication through SERCOS III master and PROFIBUS interfaces, and is rated for a device peak current of 6 Amps with an IP20 protection rating. Air cooling is provided via an integrated blower, and it operates on a mains voltage of 3 x AC 110 to 230 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW drive controller from Bosch Rexroth Indramat belongs to the HCS IndraDrive Controllers series. It serves as the axis-level link between a machine-side PLC and servo or induction motors. In automated equipment, it converts command values into regulated motor current while processing feedback from the connected axis. This allows the machine to maintain commanded torque, speed, and position during repetitive industrial cycles. Because the controller handles both power output and motion-related signals, it fits applications such as transfer systems, indexing stations, and other compact automated machinery.
The unit operates from 3 x AC 110…230 V ±10%, which allows it to run from common plant supplies in that range. Its power stage can deliver a peak phase current of 6 A, which supports short-term torque demand during rapid indexing moves. The housing has an IP20 rating, so the controller is intended for installation inside a protective cabinet. Command data and drive status are exchanged over SERCOS III master (cross communication). Plant networks can also access parameters through the secondary PROFIBUS channel, and the unit uses Design Version 1 hardware without an equipped safety interface. The cabinet enclosure also helps protect the controller from accidental contact and airborne debris during normal operation.
The designated control section uses ADVANCED logic hardware for motion control tasks. Thermal energy is removed by a built-in air blower, which circulates air through the housing during operation. Motor feedback enters through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, allowing the controller to process position data from compatible feedback devices. DC-bus energy is exchanged through infeeding and shared DC-bus operation, which allows multiple drives to use a common supply module. This arrangement supports multi-axis systems that share power on the same DC bus and keeps the base unit matched to its installed control section.
Frequently Asked Questions about HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW controller?
A: The HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW supports SERCOS III master for cross communication between compatible devices.
Q: What cooling method does the HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW utilize?
A: Cooling for this controller is managed by an internal air blower integrated into the device.
Q: What is the peak current capability of the HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW drive controller?
A: The HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW provides a peak current of 6 A for connected loads.
Q: What mains voltage range does the HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW support?
A: This controller operates with a mains voltage range of 3 x AC 110 to 230 V ±10%.
Q: What is the IP rating of the HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW controller?
A: The HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW features an IP20 rating, offering basic protection against solid objects.
Q: What is the IP rating of the HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW controller?
A: The HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW features an IP20 rating, offering basic protection against solid objects.
