HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911381753
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW is a drive controller in the HCS IndraDrive Controllers series. It features SERCOS III master cross communication, a peak current of 6 Amps, and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. The controller has an IP20 rating and uses internal air cooling through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat and supplied as part of the HCS IndraDrive Controllers series. This modular device belongs to the HCS01 group and fits a narrow book-size slot inside a control cabinet while still providing the current regulation functions normally associated with larger units. In an automation line, it converts command data from a motion controller into regulated three-phase output for servo or spindle motors, allowing precise velocity and position control without external amplifiers.
At the core of the unit is the ADVANCED control section, which provides added processing resources for multi-axis coordination. Real-time communication is handled by a SERCOS III master port that also supports cross-communication, so neighboring drives can exchange status data directly. Thermal management is performed by a built-in air blower, which removes heat from the heat sink without requiring external ducting. The power stage supplies up to 6 A of peak current, making it suitable for low-inertia servomotors used in pick-and-place, packaging, or electronics lines. The enclosure has an IP20 protection rating, so the controller must be installed inside a protected cabinet and kept away from conductive dust or liquids.
The power section accepts a three-phase input of 3 x AC 110-230 V ±10%, allowing the controller to operate on common low-voltage industrial power systems. Motor feedback is connected through an encoder interface that supports IndraDyn Hiperface and EnDat 2.2 protocols, while auxiliary diagnostics or I/O expansion can be accessed through the integrated CANopen bus. The unit is not equipped with functional safety, so any STO or SIL requirements must be provided externally. Its power supply topology supports common DC-bus coupling with other IndraDrive units, allowing energy sharing during braking and acceleration.
Frequently Asked Questions about HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW controller?
A: This drive controller supports SERCOS III master with cross communication capabilities.
Q: What is the device peak current for the HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW?
A: The peak current for this model is rated at 6 A, suitable for moderate power applications.
Q: How is the HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW cooled?
A: Cooling for this unit is handled by an internal blower providing air cooling within the device.
Q: What level of protection does the IP20 rating provide on the HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW?
A: The IP20 rating means this controller is protected against solid objects larger than 12 mm but is not water-resistant.
Q: What is the required mains voltage for the HCS01.1E-W0006-A-02-A-CC-EC-CN-NN-NN-FW controller?
A: The mains voltage supported is three-phase AC 110 to 230 V with a tolerance of ±10%.
