HCS01.1E-W0005-A-03-E-S3-EC-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911328444
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
46 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-E-S3-EC-NN-NN-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It provides a device peak current of 5 Amps and supports SERCOS III communication interfaces. This unit uses internal air cooling through an integrated blower and offers an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0005-A-03-E-S3-EC-NN-NN-NN-FW is a compact drive controller manufactured by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. It regulates torque, speed, and position for servo or induction motors, forming the link between a plant's motion control program and the mechanical axes on automated production equipment. Its modular format supports installation in multi-axis cabinets where space and standardized layout matter. Closed-loop control helps the axis maintain commanded motion when load conditions change during normal operation. It can be used wherever a central control system sends motion commands that must be translated into motor current and axis response.
For networked motion tasks, the controller exchanges real-time data with master PLCs over SERCOS III. It accepts a three-phase supply of 3 x AC 200 to 500 V ±10% and can deliver up to 5 A of peak output current to the connected motor windings. That current range suits compact motor applications where precise regulation is required within a small drive footprint. Heat is removed by internal air cooling through an integrated blower, so no external fan tray is needed, and the enclosure carries an IP20 rating for cabinet installation. The controller is intended for cabinet-mounted systems that route supply power and motor connections through a compact drive assembly. During deceleration, the unit supports infeeding and fed operation, returning regenerated energy to the shared DC link rather than dissipating it locally.
The controller uses the ECONOMY control section in design version 1 and must be paired with the appropriate power stage. Using the correct power stage is necessary so the control section and power electronics operate as a matched drive unit. Position feedback enters through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder input, while a secondary feedback channel and the safety interface are not included on this model. This input allows the drive to receive motor position data for closed-loop regulation. Interface 2 is not populated, and no additional mechanical options are supplied.
