HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331679
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features a SERCOS III communication interface and supports encoder types like IndraDyn Hiperface and EnDat 2.1/2.2. The controller offers 5 amp device peak current, an internal blower for cooling, and includes STO and SBC safety interfaces.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat produces the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW, a compact drive controller within the HCS IndraDrive Controllers series. Intended for cabinet installation, the unit coordinates power conversion, feedback processing, and safety supervision for servo and induction motors used in packaging stations, handling gantries, and general factory automation. By integrating power electronics with real-time interfaces, the controller serves as the central actuator node that links the motion sequence programmed in the PLC to the stator windings of the connected motor.
Electrical compatibility starts with the mains input of 3 × AC 200…500 V ±10%, so the same device can be wired to low or medium factory voltages without tap changes. Under acceleration, the inverter can deliver a peak phase current of 5 A, allowing short bursts of torque that exceed the continuous rating of the attached axis. Real-time motion data and parameters travel over the fiber or copper ring of SERCOS III, giving deterministic cycle times for multi-axis synchronization. Internal thermal management relies on an internal air blower, meaning a built-in fan pushes cabinet air across the heat sink and removes the need for external ducts. The electronics are housed in an IP20 enclosure, which limits direct finger contact but requires placement in a protected panel.
The control section mounted on the base unit is identified as the ECONOMY type, which omits advanced PLC functions yet preserves functional safety through the integrated STO and SBC circuits that can cut torque and release the brake on demand. Encoder feedback arrives through the multi-protocol port specified as IndraDyn Hiperface/EnDat 2.1/2.2, allowing the controller to close high-resolution position loops without additional interface cards. For power management, the device can operate as an infeeding or fed module, so it either supplies DC bus energy to neighboring axes or draws from a shared supply, supporting modular drive lineups while keeping component count low.
Frequently Asked Questions about HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW:
Q: What communication interface does the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW controller use?
A: The HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW uses a SERCOS III communication interface for system integration.
Q: How is the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW cooled?
A: This drive controller is equipped with a built-in blower for internal air cooling.
Q: How is the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW cooled?
A: This drive controller is equipped with a built-in blower for internal air cooling.
Q: What IP rating does the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW feature?
A: The IP rating for this model is IP20, which means it is protected against solid objects greater than 12.5mm but has no special protection against liquids.
Q: What IP rating does the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW feature?
A: The IP rating for this model is IP20, which means it is protected against solid objects greater than 12.5mm but has no special protection against liquids.
Q: What safety interfaces are available on the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW?
A: This model provides STO (Safe Torque Off) and SBC (Safe Brake Control) safety interfaces.
Q: What safety interfaces are available on the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW?
A: This model provides STO (Safe Torque Off) and SBC (Safe Brake Control) safety interfaces.
Q: What is the peak current capability of the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW?
A: The drive controller supports a device peak current of 5 A, allowing for short-term current demands.
Q: What is the peak current capability of the HCS01.1E-W0005-A-03-E-S3-EC-NN-L4-NN-FW?
A: The drive controller supports a device peak current of 5 A, allowing for short-term current demands.
