HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911341015
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features a device peak current of 5 Amps, an IP20 rating, and supports a mains voltage of 3 x AC 200 to 500 Volts plus or minus 10 percent. This model provides SERCOS III communication, an ECONOMY control section design, and air cooling through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW is a drive controller in the HCS IndraDrive Controllers series from Bosch Rexroth Indramat. It is used between the plant mains supply and a synchronous servo motor, where it converts command data into three-phase power for controlled torque and speed. In automated equipment, the unit regulates motor current, monitors feedback, and supports motion-related safety so machine axes can follow precise motion profiles while remaining electrically isolated from upstream control electronics. This arrangement makes it suitable for cabinet-mounted motion systems that need coordinated axis control without placing the power electronics directly at the motor.
Data exchange with higher-level controls occurs over SERCOS III, which supports cycle-synchronous communication between the controller and the rest of the automation system. The power stage accepts 3 x AC 200 to 500 V ±10% and can deliver up to 5 A of peak output current to the motor windings. This capacity suits smaller servo axes that still require accurate current regulation during acceleration and speed changes. Internal thermal management uses an integrated blower, so no external heat sink is required inside the cabinet and airflow remains localized to the drive. The housing has an IP20 rating and must be installed in an enclosure that protects against dust and accidental contact. The control section is the ECONOMY variant, and Interface 2 is not equipped.
Position feedback is handled through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, allowing compatibility with supported motor feedback systems and accurate rotor position capture. The integrated safety channel provides STO, which removes torque when a stop command is issued and supports safe shutdown of drive power at the motor output. The DC link uses an infeeding and fed supply concept, which supports shared energy buses in multi-axis systems where power can be distributed across connected axes. The hardware is built as Version 1. Its layout is intended for standard cabinet integration in systems that use a common DC bus.
Frequently Asked Questions about HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW:
Q: What communication interface is used by the HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW controller?
A: The HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW communicates using the SERCOS III interface for high-speed, real-time control.
Q: Which encoder interfaces are available on the HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW?
A: This drive controller supports IndraDyn Hiperface and EnDat 2.1/2.2 encoders for position feedback.
Q: How is the HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW controller cooled?
A: The product features an internal air cooling method utilizing an integrated blower.
Q: What is the peak current supported by the HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW?
A: This model has a peak device current rating of 5 A.
Q: What type of safety interface is included on the HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW?
A: The HCS01.1E-W0005-A-03-E-S3-EC-NN-L3-NN-FW provides Safe Torque Off (STO) as its safety interface.
