Product Description:

The HCS01.1E-W0005-A-03-B-ET-EC-EC-NN-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It regulates power conversion and motor feedback to support closed-loop motion control in multi-axis automation cells and machine tools. By combining power and control electronics in one housing, the unit reduces cabinet wiring and keeps the installation compact. That layout also helps the controller manage motor response and command signals without separate external control hardware. It is intended for applications that require coordinated speed, torque, and position control from a single drive platform.

This controller accepts a three-phase mains supply of 3 × AC 200–500 V ±10%, so it can operate on a wide range of factory power systems without a separate transformer. This wide input range is useful in facilities where available line voltage differs from one machine area to another. Cooling is provided by internal air cooling, which moves air across heat-generating components inside the housing. The enclosure is rated IP20, so the controller must be installed inside a cabinet to prevent contact with live parts. Peak output capability reaches 5 A, which supports short acceleration demands within the drive’s output range. Communication is handled over Multi-Ethernet, allowing connection to supported industrial Ethernet networks through one communication option.

The control section is identified as Basic, and the housing uses Design Version 1. Power enters through an infeeding or fed supply stage, which supports common DC-bus arrangements with other compatible drives. Two encoder ports support IndraDyn Hiperface or EnDat 2.1 and 2.2 feedback devices for position control, giving the drive access to the motor signals needed for closed-loop operation. The unit has no safety interface, so safety-related I/O must be provided elsewhere in the system. The line designation is HCS01, which places the unit in the corresponding product line.