HCS01.1E-W0005-A-03-A-CC-EC-EC-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345865
Ask for AvailabilityThe Bosch Rexroth Indramat HCS01.1E-W0005-A-03-A-CC-EC-EC-L3-NN-FW is a drive controller from the HCS IndraDrive Controllers series featuring an ADVANCED control section design. It supports a mains voltage range of 3 x AC 200 to 500 V and offers SERCOS III master cross communication, with a device peak current of 5 Amps. The unit employs internal air cooling through an integrated blower and includes STO safe torque off and IP20 protection.
Internal Product Review
The HCS01.1E-W0005-A-03-A-CC-EC-EC-L3-NN-FW is an advanced drive controller from the HCS IndraDrive series by Bosch Rexroth Indramat, offering SERCOS III master communication and dual encoder interfaces supporting IndraDyn Hiperface/EnDat 2.1/2.2. Internal air cooling via an integrated blower and a peak current rating of 5 A enable reliable operation in demanding automation setups. The built-in STO (Safe Torque Off) safety interface and IP20 protection make this controller a dependable choice for industrial drive applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-A-CC-EC-EC-L3-NN-FW is an HCS drive controller in the HCS IndraDrive Controllers series. It acts as the power and motion-control stage between the plant supply and servo motors used in automation cells, conveyors, and handling modules. In closed-loop motion systems, it regulates motor current so connected axes can respond accurately to speed and position commands. The unit operates within the HCS01 line and is built in Design Version 1, which gives it a standardized housing format within this platform. The controller is equipped with the ADVANCED control section, which supports extended motion functions for coordinated axis control.
Communication with higher-level control systems takes place over SERCOS III master with cross communication, allowing cycle-synchronous command and diagnostic data to travel on a real-time fiber-optic ring. The power stage accepts 3 x AC 200...500 V ±10% input and uses internal air cooling through an integrated blower to remove heat from the electronics without external cabinet openings. Peak output current reaches 5 A, which suits low-power servo axes such as grippers and small tooling spindles. The enclosure has an IP20 rating, so it is intended for installation inside a control cabinet rather than for direct exposure to liquids or washdown conditions. The integrated safety interface supports STO (Safe Torque Off) for rapid torque shutdown when the application requires a safe removal of motor torque.
Feedback handling is arranged through a shared IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface. Both interface channels can process the supported sensor types on primary or auxiliary axes, which keeps feedback handling consistent across compatible motor connections. The power section supports infeeding or fed operation, so the unit can either supply energy to a common DC bus or draw energy from it in a multi-axis arrangement. This operating mode fits systems in which several axes share power and exchange energy through the same drive network.
