HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911347688
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features a SERCOS III master communication interface and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. The controller has a peak current rating of 5 Amps, uses internal air cooling through an integrated blower, and has an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. As a compact single-axis unit, it regulates power to an attached servo or induction motor, monitors feedback, and exchanges motion commands with a higher-level PLC. This controller integrates into distributed automation lines where tight velocity and position loops are required for packaging, handling, or assembly stations. Its compact format also suits cabinet layouts where one dedicated controller is assigned to each driven axis. Because it is intended for single-axis use, one drive channel is dedicated to one motor rather than being shared across multiple outputs.
The device communicates over the SERCOS III real-time bus, allowing deterministic cross-communication between multiple axes. It accepts a three-phase supply of 3 × AC 200–500 V and can source up to 5 A of peak current to the motor windings, a range suited for low-power actuators. An IP20 housing limits ingress to fingers and large debris and is intended for installation inside a control cabinet. Thermal management relies on internal air cooling with an integrated blower that expels heat from the power stage. Encoder feedback is routed through the multifunction interface that supports IndraDyn Hiperface/EnDat 2.1/2.2 protocols, allowing absolute position data to reach the drive without additional converters. No dedicated safety interface is included, so machine-level safety must be handled externally.
The control section supplied with this converter is the ADVANCED type, providing extended motion functions and parameter memory for complex profiles. The unit is Version 1. It uses an Infeeding/Feeded power topology, so the controller can return regenerated energy to the DC bus or receive energy from an upstream supply module. The extended control section is suited to applications that require more flexible motion handling inside the drive. DC-bus energy exchange can also reduce the load on the upstream supply when braking energy is available from another axis.
Frequently Asked Questions about HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW support?
A: The HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW supports SERCOS III master cross communication for network connectivity.
Q: Which encoder interfaces are compatible with the HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW?
A: This controller is designed for use with encoder interfaces including IndraDyn Hiperface and EnDat 2.1/2.2.
Q: What cooling method is employed in the HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW drive controller?
A: The HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW is equipped with an internal air cooling system using an integrated blower.
Q: What is the peak current rating of the HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW?
A: This device has a peak current rating of 5 A, suitable for controlling moderate loads.
Q: What mains voltage range does the HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW require for operation?
A: The HCS01.1E-W0005-A-03-A-CC-EC-DA-NN-NN-FW operates with a mains voltage supply of 3 x AC 200 to 500 V with a tolerance of ±10%.
