FVCA01.2-45K0-3P4-MDA-LP-NNNN-02VRS Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912005342
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
27 Seconds
The Bosch Rexroth Indramat FVCA01.2-45K0-3P4-MDA-LP-NNNN-02VRS is a frequency converter from the FVCA Frequency Converters series and supports a nominal voltage of 400 V with three-phase input. It offers an output power of 45.0 kW, rated input current of 104.0 A, and features control modes like V/f, SVC, and FOC with a PID controller. The converter has a protection rating of IP20, a net weight of 37.0 kg, and utilizes an LCD display with ModBus communication interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FVCA01.2-45K0-3P4-MDA-LP-NNNN-02VRS is a frequency converter produced by Bosch Rexroth Indramat in the FVCA Frequency Converters series. Deployed on three-phase drive systems, it adjusts output voltage and frequency to control AC motor speed in automated lines. In automated equipment, this allows connected motors to run at commanded speeds instead of fixed line frequency. The unit is supplied in frame size F and occupies 650 mm in height, 325 mm in width, and 265 mm in depth, dimensions suited to standard control cabinets. It belongs to the 01 series line, is in release state 02, and carries design revision 2.
The converter delivers 45.0 kW of output power while supplying 95.0 A to the motor and drawing 104.0 A from the mains, resulting in an apparent power demand of 62.0 kVA. A nominal 400 V bus is modulated with SVPWM at 2.0 kHz, enabling smooth torque production across changing load conditions. Control options include V/f, sensorless vector control, and field-oriented control, while an internal PID controller handles loop regulation for stable process response. Digital frequency commands hold 0.01% accuracy with 0.01 Hz resolution, which supports precise ramp control and repeatable speed adjustment. During zero-speed starts, the field-oriented control algorithm can apply up to 200% torque, and the built-in filter is rated for industrial C3 environments to help limit conducted emissions.
A ModBus port, a front-panel potentiometer for manual setpoints, and an LCD display support networked control, local adjustment, and operating feedback. The unit includes the full application menu set, and braking energy is routed to an external resistor because the internal chopper is only preconfigured. Service is permitted in IP20 cabinets, and the converter weighs 37.0 kg. The field-oriented control speed range reaches 1000:1, and input compliance spans 3 AC 380 to 480 V (-15% / +10%).
