FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912004035
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
43 Seconds
The Bosch Rexroth Indramat FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 is a frequency converter in the FVCA Frequency Converters series, featuring a nominal voltage of 400 V and an output power of 75.0 kW. It operates at an apparent power of 100.0 kVA, with a rated input current of 157.0 A and supports three-phase supply for input frequencies of 50/60 Hz. This converter has an IP20 protection rating, weighs 56.7 kg, and uses ModBus communication along with an LCD display and potentiometer control hardware.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 frequency converter belongs to the FVCA Frequency Converters series from Bosch Rexroth Indramat. It regulates the speed and torque of three-phase induction motors used in automated material handling, pumping, and processing lines. The unit operates on a nominal 400 V supply, accepts 50/60 Hz mains across three phases, and exchanges commands and feedback over an integrated Modbus interface. Physical integration is supported by a G-frame housing that measures 700 mm in height, 450 mm in width, and 302.5 mm in depth. An LCD panel and an onboard potentiometer allow local setpoint adjustment without external tools.
The converter delivers 75.0 kW of output power, and its apparent rating is 100 kVA at full load. Under these conditions, the rectifier draws 157.0 A from the mains and the inverter supplies 152.0 A to the motor. It tolerates line excursions between 3 AC 380 to 480 V (-15% / +10%), which supports operation on a range of industrial power systems. The inverter carrier is factory set to 2.0 kHz, while the control electronics resolve commands in steps as small as 0.01 Hz. Digital frequency tolerance remains within 0.01%, and the analog channel remains within 0.05%. Field-oriented control keeps speed error below 0.05% of maximum frequency, and the slip vector method keeps torque error within 0.5%. Sinusoidal SVPWM is used without an input filter, and an external brake resistor must be connected to the internal chopper for rapid deceleration.
In closed-loop applications, the drive reaches a speed span of 1:1000 with encoder feedback. In sensorless operation, the speed span is 1:100. The housing has an IP 20 rating, and the unit has a mass of 56.7 kg. Panel mounting is permitted at elevations up to 1000 m. The product is in series line 01 and version 01.
Frequently Asked Questions about FVCA01.1-75K0-3P4-MNA-LP-P001-01V01:
Q: What supply voltage range does the FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 frequency converter support?
A: The FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 supports a voltage range of 3 AC 380...480 V with a tolerance of -15% to +10%.
Q: What is the output power rating for the FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 frequency converter?
A: This model provides an output power of 75.0 kW, making it suitable for high-demand applications.
Q: What type of display technology is implemented in the FVCA01.1-75K0-3P4-MNA-LP-P001-01V01?
A: It uses an LCD as the display technology for clear operational readouts and settings adjustments.
Q: What is the protection rating of the FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 frequency converter?
A: The FVCA01.1-75K0-3P4-MNA-LP-P001-01V01 features an IP 20 protection rating, providing basic ingress protection.
Q: What is the speed control range with and without encoder for the FVCA01.1-75K0-3P4-MNA-LP-P001-01V01?
A: Speed control accuracy is 1:1000 with an encoder and 1:100 without an encoder for this model.
