FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912003065
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 is a frequency converter from the FVCA Frequency Converters series with an output power of 4.0 kW and a nominal voltage of 400 V. It offers 10 digital inputs, 4 analog inputs, ModBus communication, and a maximum output frequency of 400 Hz. The converter features an integrated brake chopper and an IP20 protection rating, with a net weight of 4.8 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 frequency converter is produced by Bosch Rexroth Indramat within the FVCA Frequency Converters series. It belongs to series line 01 and design revision 1, and it includes a built-in potentiometer for local speed reference. In factory automation, it converts fixed three-phase mains into a controlled AC output so induction motors can be accelerated, decelerated, or held at steady operating speeds for material-handling and fluid-moving equipment. This arrangement lets the drive vary motor speed to match changing process demand while still using a standard industrial power source.
Electrical performance centers on a nominal bus of 400 V, while the converter can accept supplies in the wider band of 3 AC 380...480 V to accommodate normal line variation. During continuous duty, it draws 16.0 A from the line and delivers up to 10.0 A to the motor, corresponding to a mechanical output of 4.0 kW. Ten digital inputs, four analog inputs, and one encoder channel support application-specific control and feedback, while two relay outputs can report ready or fault status to a higher-level controller. Parameter access is available through the front LCD panel or over ModBus, so operating values can be viewed and adjusted from either the local interface or a connected control network.
The inverter’s switching bridge operates at a default carrier frequency of 8.0 kHz and can modulate output frequency up to 400 Hz, making it suitable for both standard motors and higher-speed applications. Apparent power capability is rated at 6.5 kVA, and an integrated brake chopper dissipates regenerated energy during quick stops or deceleration ramps. The housing uses frame size B with IP20 protection, and the unit weighs 4.8 kg, which helps it fit compact cabinet layouts without adding much panel load. No line filter is included, screw terminals accept M6 hardware, and the three supply phases feed the converter through an internal rectifier before power is processed for the motor output stage.
Frequently Asked Questions about FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01:
Q: What is the output power capability of the FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 frequency converter?
A: This frequency converter has a rated output power of 4.0 kW for driving motors and loads.
Q: What type of display technology is used on the FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01?
A: The FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 is equipped with an LCD display for status and configuration viewing.
Q: What supply voltage and phase requirements does the FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 need?
A: This model is compatible with three-phase power supplies in the voltage range of 380 to 480 V AC (with ±15% / +10% tolerances).
Q: How many digital input channels does the FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 provide?
A: There are 10 digital inputs available on this frequency converter for integrating various control signals.
Q: Which communication protocol does the FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 support?
A: The FVCA01.1-4K00-3P4-MNA-LP-NNNN-01V01 is equipped with ModBus as its standard communication interface.
